Resistive Graphene Humidity Sensors with Rapid and Direct Electrical Readout
arXiv:1510.07229 · doi:10.1039/C5NR06038A
Abstract
We demonstrate humidity sensing using a change of electrical resistance of a single- layer chemical vapor deposited (CVD) graphene that is placed on top of a SiO2 layer on a Si wafer. To investigate the selectivity of the sensor towards the most common constituents in air, its signal response was characterized individually for water vapor (H2O), nitrogen (N2), oxygen (O2), and argon (Ar). In order to assess the humidity sensing effect for a range from 1% relative humidity (RH) to 96% RH, devices were characterized both in a vacuum chamber and in a humidity chamber at atmospheric pressure. The measured response and recovery times of the graphene humidity sensors are on the order of several hundred milliseconds. Density functional theory simulations are employed to further investigate the sensitivity of the graphene devices towards water vapor. Results from the interaction between the electrostatic dipole moment of the water and the impurity bands in the SiO2 substrate, which in turn leads to electrostatic doping of the graphene layer. The proposed graphene sensor provides rapid response direct electrical read out and is compatible with back end of the line (BEOL) integration on top of CMOS-based integrated circuits.
Nanoscale, 2015
References in corpus (13)
- The Raman Fingerprint of Graphene
- Ultrahigh electron mobility in suspended graphene
- Detection of Individual Gas Molecules Absorbed on Graphene
- Giant Intrinsic Carrier Mobilities in Graphene and Its Bilayer
- Molecular Doping of Graphene
- Intrinsic Response of Graphene Vapor Sensors
- Electromechanical Piezoresistive Sensing in Suspended Graphene Membranes
- Growth and properties of few-layer graphene prepared by chemical vapor deposition
- Integrating MEMS and ICs
- First-principles studies of water adsorption on graphene: The role of the substrate
- The environment of graphene probed by electrostatic force microscopy
- NO2 and Humidity Sensing Characteristics of Few-layer Graphene
- Chemical vapor deposited graphene: From synthesis to applications
Cited by in corpus (20)
- Image sensor array based on graphene-CMOS integration
- Nanoelectromechanical Sensors based on Suspended 2D Materials
- Piezoresistive Properties of Suspended Graphene Membranes under Uniaxial and Biaxial Strain in Nanoelectromechanical Pressure Sensors
- Water on graphene: Review of recent progress
- Contact Resistance Study of Various Metal Electrodes with CVD Graphene
- High performance graphene oxide-based humidity sensor integrated on a photonic crystal cavity
- Recent Advances in Graphene-Based Humidity Sensors with the Focus of Structural Design: A Review
- Performance-Enhanced Non-Enzymatic Glucose Sensor Based on Graphene-Heterostructure
- Dependable contact related parameter extraction in graphene-metal junctions
- All CVD Boron Nitride Encapsulated Graphene FETs with CMOS Compatible Metal Edge Contacts
- Non-invasive Scanning Raman Spectroscopy and Tomography for Graphene Membrane Characterization
- Ultrafast humidity sensor based on liquid phase exfoliated graphene
- High-yield large-scale suspended graphene membranes over closed cavities for sensor applications
- Ultrahigh Doping of Graphene Using Flame-Deposited MoO3
- Self-organized Growth of Graphene Nanomesh with Increased Gas Sensitivity
- Influence of Humidity on the Resistive Switching of Hexagonal Boron Nitride-Based Memristors
- Enhancing the sensitivity and selectivity of pyrene-based sensors for detection of small gaseous molecules via destructive quantum interference
- Humidity Sensing Properties of Different Atomic Layers of Graphene on SiO2/Si Substrate
- Reliable lift-off patterning of graphene dispersions for humidity sensors
- Lambert W Function Framework for Graphene Nanoribbon Quantum Sensing: Theory, Verification, and Multi-Modal Applications