Intrinsic Response of Graphene Vapor Sensors
arXiv:0811.3091 · doi:10.1021/nl8033637
Abstract
Graphene is a purely two-dimensional material that has extremely favorable chemical sensor properties. It is known, however, that conventional nanolithographic processing typically leaves a resist residue on the graphene surface, whose impact on the sensor characteristics of the system has not yet been determined. Here we show that the contamination layer both degrades the electronic properties of the graphene and masks graphene s intrinsic sensor responses. The contamination layer chemically dopes the graphene, enhances carrier scattering, and acts as an absorbent layer that concentrates analyte molecules at the graphene surface, thereby enhancing the sensor response. We demonstrate a cleaning process that verifiably removes the contamination on the device structure and allows the intrinsic chemical responses of graphene to be measured.
arXiv comment9 pages and 2 figures
References in corpus (15)
- Two-Dimensional Gas of Massless Dirac Fermions in Graphene
- The Raman Fingerprint of Graphene
- Ultrahigh electron mobility in suspended graphene
- Detection of Individual Gas Molecules Absorbed on Graphene
- Giant Intrinsic Carrier Mobilities in Graphene and Its Bilayer
- Intrinsic and Extrinsic Performance Limits of Graphene Devices on SiO2
- Adsorption of H2O, NH3, CO, NO2, and NO on graphene: A first-principles study
- Atomic Structure of Graphene on SiO2
- Temperature dependent transport in suspended graphene
- Molecular Doping of Graphene
- DNA-decorated carbon nanotubes for chemical sensing
- Colors Of Graphite On Silicon Dioxide
- Non-volatile molecular memory elements based on ambipolar nanotube field effect transistors
- The environment of graphene probed by electrostatic force microscopy
- Paramagnetic adsorbates on graphene: a charge transfer analysis
Cited by in corpus (49)
- Carbon nanomaterials for electronics, optoelectronics, photovoltaics, and sensing
- Graphene Nucleation on Transition Metal Surface: Structure Transformation and Role of the Metal Step Edge
- Resistive Graphene Humidity Sensors with Rapid and Direct Electrical Readout
- The role of contact resistance in graphene field-effect devices
- Colloquium: Graphene spectroscopy
- DNA-decorated graphene chemical sensors
- Mechanical cleaning of graphene
- High-yield production of 2D crystals by wet-jet milling
- Nanoelectromechanical Sensors based on Suspended 2D Materials
- Electrochemical behaviour of monolayer and bilayer graphene
- Micro-engineered CHNHPbI nanowire/graphene phototransistor for low intensity light detection at room temperature
- Ultrasensitive Field-Effect Biosensors Enabled by the Unique Electronic Properties of Graphene
- Scalable Production of Highly-Sensitive Nanosensors Based on Graphene Functionalized with a Designed G Protein-Coupled Receptor
- Electronic and optical properties of graphene nanoribbons in external fields
- UV/Ozone treatment to reduce metal-graphene contact resistance
- Enhancing the response of NH3 graphene-sensors by using devices with different graphene-substrate distances
- On the mechanism of gas adsorption for pristine, defective and functionalized graphene
- Adsorption/desorption and electrically controlled flipping of ammonia molecules on graphene
- Room-Temperature High On/Off Ratio in Suspended Graphene Nanoribbon Field Effect Transistors
- Scanning Gate Microscopy on Graphene: Charge Inhomogeneity and Extrinsic Doping
- Ultra-Clean Freestanding Graphene by Platinum-Metal Catalysis
- Strain engineering on graphene towards tunable and reversible hydrogenation
- In-situ electronic characterization of graphene nanoconstrictions fabricated in a transmission electron microscope
- Atmospheric doping effects in epitaxial graphene: correlation of local and global electrical measurements
- Gas Sensing Properties of Single Conducting Polymer Nanowires and the Effect of Temperature
- Graphite Nanoeraser
- Kelvin Probe Microscopy and Electronic Transport Measurements in Reduced Graphene Oxide Chemical Sensors
- Variability Effects in Graphene: Challenges and Opportunities for Device Engineering and Applications
- Graphene-protein bioelectronic devices with wavelength-dependent photoresponse
- Detection of DNA and Poly-L-Lysine using CVD Graphene-channel FET Biosensors
- Capacitive Sensing of Intercalated H2O Molecules Using Graphene
- Spatially resolved electronic inhomogeneities of graphene due to subsurface charges
- Performance-Enhanced Non-Enzymatic Glucose Sensor Based on Graphene-Heterostructure
- Optimization of graphene dry etching conditions via combined microscopic and spectroscopic analysis
- Temperature induced inversion of oxygen response in CVD graphene on SiO2
- High sensitive quasi freestanding epitaxial graphene gassensor on 6H-SiC
- Transfer Printing of CVD Graphene FETs on Patterned Substrates
- Ultrafast humidity sensor based on liquid phase exfoliated graphene
- Electrical Transport Properties of Graphene Nanoribbons Produced from Sonicating Graphite in Solution
- Self-organized Growth of Graphene Nanomesh with Increased Gas Sensitivity
- Formation of hexagonal Boron Nitride on Graphene-covered Copper Surfaces
- Imaging the potential distribution of individual charged impurities on graphene by low-energy electron holography
- Surface electron perturbations and the collective behavior of atoms adsorbed on a cylinder
- Chemical sensing with atomically-thin metals templated by a two-dimensional insulator
- Gate-tunable spin exclusive or operation in a silicon-based spin device at room temperature
- High-density and scalable graphene Hall sensor arrays through monolithic CMOS integration
- Graphene-based chemiresistive gas sensors
- Direct and Scalable Chemical Vapor Deposition of Ultrathin Low-Noise MoS2 Membranes on Apertures
- Activation of magnetic moments in CVD-grown graphene by annealing