Thermal noise in optical cavities revisited
arXiv:1111.4950 · doi:10.1364/JOSAB.29.000178
Abstract
Thermal noise of optical reference cavities sets a fundamental limit to the frequency instability of ultra-stable lasers. Using Levin's formulation of the fluctuation-dissipation theorem we correct the analytical estimate for the spacer contribution given by Numata et al.. For detailed analysis finite-element calculations of the thermal noise focusing on the spacer geometry, support structure and the usage of different materials have been carried out. We find that the increased dissipation close to the contact area between spacer and mirrors can contribute significantly to the thermal noise. From an estimate of the support structure contribution we give guidelines for a low-noise mounting of the cavity. For mixed-material cavities we show that the thermal expansion can be compensated without deteriorating the thermal noise.
arXiv comment8 pages, 8 figures, 3 tables, accepted for publication in JOSA B
References in corpus (19)
- Sr lattice clock at 1x10^{-16} fractional uncertainty by remote optical evaluation with a Ca clock
- Internal thermal noise in the LIGO test masses : a direct approach
- Compact, thermal-noise-limited optical cavity for diode laser stabilization at 1 x 10-15
- Thermal noise in interferometric gravitational wave detectors due to dielectric optical coatings
- Ultrastable lasers based on vibration insensitive cavities
- Thermodynamical fluctuations and photo-thermal shot noise in gravitational wave antennae
- Ultra-low noise microwave generation with fiber-based optical frequency comb and application to atomic fountain clock
- Long-distance frequency transfer over an urban fiber link using optical phase stabilization
- Tuning the Thermal Expansion Properties of Optical Reference Cavities with Fused Silica Mirrors
- Thermoelastic Noise and Homogeneous Thermal Noise in Finite Sized Gravitational-Wave Test Masses
- Thermo-optic noise in coated mirrors for high-precision optical measurements
- Ultra-Low Noise Microwave Extraction from Fiber-Based Optical Frequency Comb
- Realization of a monolithic high-reflectivity cavity mirror from a single silicon crystal
- Thermoelastic dissipation in inhomogeneous media: loss measurements and displacement noise in coated test masses for interferometric gravitational wave detectors
- Thermodynamical fluctuations in optical mirror coatings
- Monocrystalline AlGaAs heterostructures for high-reflectivity high-Q micromechanical resonators in the MHz regime
- Phase- coherent comparison of two optical frequency standards over 146 km using a telecommunication fiber link
- Thermal noises and noise compensation in high-reflection multilayer coating
- Fluctuation-dissipation theorem for thermo-refractive noise
Cited by in corpus (34)
- A sub-40 mHz linewidth laser based on a silicon single-crystal optical cavity
- 8E-17 fractional laser frequency instability with a long room-temperature cavity
- Atomic Clocks for Geodesy
- Ultra-stable laser with average fractional frequency drift rate below
- A compact, robust, and transportable ultra-stable laser with a fractional frequency instability of
- A cavity-stabilized laser with acceleration sensitivity below /g
- Laser frequency stabilization based on steady-state spectral-hole burning in Eu:YSiO
- A compact, thermal noise limited reference cavity for ultra-low noise microwave generation
- Providing 1E-16 short-term stability of a 1.5 μm laser to optical clocks
- Single-ion, transportable optical atomic clocks
- Reducing the effect of thermal noise in optical cavities
- Excess noise and photo-induced effects in highly reflective crystalline mirror coatings
- Fundamental thermal noise limits for optical microcavities
- Non-linear Spectroscopy of Sr Atoms in an Optical Cavity for Laser Stabilization
- A transportable interrogation laser system with an instability of
- Observation of Motion Dependent Nonlinear Dispersion with Narrow Linewidth Atoms in an Optical Cavity
- BOOST -- A Satellite Mission to Test Lorentz Invariance Using High-Performance Optical Frequency References
- Ultra-low phase noise all-optical microwave generation setup based on commercial devices
- Absolute and relative stability of an optical frequency reference based on spectral hole burning in Eu:YSiO
- Dynamics of bad-cavity enhanced interaction with cold Sr atoms for laser stabilization
- An ultra-stable cryogenic sapphire cavity laser with an instability of based on a low vibration level cryostat
- 946-nm Nd:YAG digital-locked laser at in 1 s and transfer-locked to a cryogenic silicon cavity
- Long 48-cm ULE cavities in vertical and horizontal orientations for Sr optical clock
- Broadband Measurement of Coating Thermal Noise in Rigid Fabry-Perot Cavities
- Near-Infrared Scanning Cavity Ringdown for Optical Loss Characterization of Supermirrors
- Tenfold reduction of Brownian noise in optical interferometry
- Optical ultra-stable optical clock cavities as resonant mass gravitational wave detectors in search for new physics
- Picometer Sensitive Prototype of the Optical Truss Interferometer for LISA
- Detecting milli-Hz gravitational waves with optical resonators
- Mechanical loss and stability analysis of NEXCERA in ultra-stable optical cavities
- Dimensional Reduction in Quantum Optics
- Partial compensation of thermal noise in the fundamental mode of an optical cavity
- Cordierite-based optical resonators with extremely low thermal expansion
- Laser fractional frequency instability at with a room temperature optical reference cavity