Long 48-cm ULE cavities in vertical and horizontal orientations for Sr optical clock
arXiv:2106.01887 · doi:10.1364/AO.437473
Abstract
The development of an optical clock with ultimate accuracy and stability requires lasers with very narrow linewidth. We present two ultrastable laser systems based on 48 cm long Fabry-Perot cavities made of ULE glass in horizontal and vertical configurations operating at 698 nm. Fractional frequency instability of the beat signal between two lasers reaches 1.6e-15 at the averaging time of 1 s. We experimentally characterized the contribution of the different noise sources (power fluctuations, residual amplitude modulation, the Doppler noise, sensitivity to the shock impact) and found that in our case the laser frequency instability to a large extent is determined by an optoelectronic feedback loop. Although the vertical configuration proved to be easier to manufacture and to transport, it turned out that it is much more sensitive to acoustics and horizontal accelerations compared to the horizontal one. Both laser systems were transported over a 60 km distance from the Lebedev Physical Institute to the Russian National Metrology Institute (VNIIFTRI) where they serve as local oscillators for spectroscopy of the clock transition in the recently developed strontium optical clock.
arXiv comment17 pages, 11 figures
References in corpus (21)
- An Al quantum-logic clock with systematic uncertainty below
- 1.5 m lasers with sub 10 mHz linewidth
- Optical clock intercomparison with precision in one hour
- Sub-Hz line width diode lasers by stabilization to vibrationally and thermally compensated ULE Fabry-Perot cavities
- On orbit performance of the GRACE Follow-On Laser Ranging Interferometer
- 8E-17 fractional laser frequency instability with a long room-temperature cavity
- Precision Metrology Meets Cosmology: Improved Constraints on Ultralight Dark Matter from Atom-Cavity Frequency Comparisons
- A quantum many-body spin system in an optical lattice clock
- Tuning the Thermal Expansion Properties of Optical Reference Cavities with Fused Silica Mirrors
- Thermal noise in optical cavities revisited
- Inner-shell clock transition in atomic thulium with small BBR shift
- Noise and instability of an optical lattice clock
- Searching for ultra-light dark matter with optical cavities
- Searching for dark matter with an unequal delay interferometer
- Ramsey-Bordé matter-wave interferometry for laser frequency stabilization at frequency instability and below
- Laser frequency stabilization based on steady-state spectral-hole burning in Eu:YSiO
- Deuteron charge radius and Rydberg constant from spectroscopy data in atomic deuterium
- Photothermal and thermo-refractive effects in high reflectivity mirrors at room and cryogenic temperature
- Locking the frequency of lasers to an optical cavity at the relative instability level
- Consistency of local and astrophysical tests of the stability of fundamental constants
- Prospects for 10^{-18} Instability Laser Referenced on Thermal Atomic Ensembles