Tuning the Thermal Expansion Properties of Optical Reference Cavities with Fused Silica Mirrors

Abstract

We investigate the thermal expansion of low thermal noise Fabry-Perot cavities made of Low Thermal Expansion (LTE) glass spacers and Fused Silica (FS) mirrors. The different thermal expansion of mirror and spacer deforms the mirror. This deformation strongly contributes to the cavity's effective Coefficient of Thermal Expansion (CTE), decreasing the zero crossing temperature by about 20 K compared to an all-LTE glass cavity. Finite element simulations and CTE measurements show that LTE rings optically contacted to the back surface of the FS mirrors allow to tune the zero crossing temperature over a range of 30 K.

arXiv comment7 pages, 2 tables, 6 figures

References in corpus (8)

• Sr lattice clock at 1x10^{-16} fractional uncertainty by remote optical evaluation with a Ca clock
• Internal thermal noise in the LIGO test masses : a direct approach
• Compact, thermal-noise-limited optical cavity for diode laser stabilization at 1 x 10-15
• Ultrastable lasers based on vibration insensitive cavities
• Ultra-low noise microwave generation with fiber-based optical frequency comb and application to atomic fountain clock
• Long-distance frequency transfer over an urban fiber link using optical phase stabilization
• Ultra-Low Noise Microwave Extraction from Fiber-Based Optical Frequency Comb
• Fabry-Perot temperature dependence and surface-mounted optical cavities

Cited by in corpus (32)

• A sub-40 mHz linewidth laser based on a silicon single-crystal optical cavity
• Making optical atomic clocks more stable with $10^{-16}$ level laser stabilization
• 8E-17 fractional laser frequency instability with a long room-temperature cavity
• Thermal noise in optical cavities revisited
• Development of a strontium optical lattice clock for the SOC mission on the ISS
• Linear Paul trap design for an optical clock with Coulomb crystals
• A compact, robust, and transportable ultra-stable laser with a fractional frequency instability of $1\times 10^{-15}$
• Field-test of a robust, portable, frequency-stable laser
• A cavity-stabilized laser with acceleration sensitivity below $10^{-12}$/g
• A compact, thermal noise limited reference cavity for ultra-low noise microwave generation
• Rugged mHz-Linewidth Superradiant Laser Driven by a Hot Atomic Beam
• A transportable clock laser system with an instability of $1.6\times 10^{-16}$
• Single-ion, transportable optical atomic clocks
• A transportable interrogation laser system with an instability of $\mathrm{mod}{\sigma }_{\mathrm{y}}=3\times 10^{-16}$
• Simple vibration insensitive cavity for laser stabilization at the 10^{-16} level
• Mathematical model of thermal shields for long-term stability optical resonators
• Design of an optical reference cavity with low thermal noise and flexible thermal expansion properties
• Ultra-compact reference ULE cavity
• Locking the frequency of lasers to an optical cavity at the $1.6\times 10^{-17}$ relative instability level
• 946-nm Nd:YAG digital-locked laser at $1.1\times 10^{-16}$ in 1 s and transfer-locked to a cryogenic silicon cavity
• Long 48-cm ULE cavities in vertical and horizontal orientations for Sr optical clock
• Coupling Light to Higher Order Transverse Modes of a Near-Concentric Optical Cavity
• Ultra-stable transportable ultraviolet clock laser using cancellation between photo-thermal and photo-birefringence noise
• Ultrastable lasers: investigations of crystalline mirrors and closed cycle cooling at 124 K
• STE-QUEST Mission and System Design - Overview after completion of Phase-A
• Temperature-independent optical cavities for laser frequency stabilization
• Optical ultra-stable optical clock cavities as resonant mass gravitational wave detectors in search for new physics
• Mechanical loss and stability analysis of NEXCERA in ultra-stable optical cavities
• Photo-birefringent effects in crystalline AlGaAs mirror coatings
• Laser fractional frequency instability at $4\times 10^{-17}$ with a room temperature optical reference cavity
• Production and measuring methods and procedures in precision optical cavities production
• Cordierite-based optical resonators with extremely low thermal expansion