Cordierite-based optical resonators with extremely low thermal expansion

Abstract

Applications for ultra-stable lasers outside controlled laboratory environments require compact and robust optical resonators with reduced sensitivity to temperature fluctuations. The low thermal expansion coefficient (CTE) and the high stiffness make cordierite-based ceramics, such as NEXCERA, attractive for vibration insensitive room-temperature resonators. We revisit the effective CTE of resonators with spacers and mirrors made of different materials and use finite element simulations to analyze the impact of a CTE mismatch in a cordierite-based resonator with mirrors made of ultra-low expansion (ULE) glass or fused silica (FS). This enabled us to determine the CTE of a cordierite spacer from the measured effective CTE of a resonator. We confirm a six-fold larger CTE slope of cordierite around the zero-crossing temperature than in ULE glass. The steep CTE slope, in combination with the large stiffness, makes cordierite-based resonators far less sensitive to CTE mismatch with FS mirrors, thereby eliminating the need for additional compensation rings. We further consider the so far neglected case, where the CTE of the spacer is larger than that of the mirror, and propose resonator designs in which the thermal length change of the spacer is fully or partially compensated by the deflection of the mirrors. This results in a cordierite-based resonator with ULE mirrors whose effective CTE can be close to zero over a temperature range of several tens of Kelvin. We are extending our concept to resonators based on crystalline materials with high stiffness and low isothermal length change, such as silicon, enabling compact and robust room-temperature resonators for terrestrial and space-born applications.

13 pages, 5 figures

References in corpus (18)

• Advanced Virgo: a 2nd generation interferometric gravitational wave detector
• Advanced LIGO
• Interferometer design of the KAGRA gravitational wave detector
• 1.5 $\mu$m lasers with sub 10 mHz linewidth
• Optical clock intercomparison with $6\times 10^{-19}$ precision in one hour
• Precision Metrology Meets Cosmology: Improved Constraints on Ultralight Dark Matter from Atom-Cavity Frequency Comparisons
• A gravitational redshift test using eccentric Galileo satellites
• Tuning the Thermal Expansion Properties of Optical Reference Cavities with Fused Silica Mirrors
• Search for domain wall dark matter with atomic clocks on board global positioning system satellites
• Thermal noise in optical cavities revisited
• An ultrastable silicon cavity in a continuously operating closed-cycle cryostat at 4 K
• The Science of the Einstein Telescope
• Demonstration of a time scale based on a stable optical carrier
• High quality factor measured in fused silica
• Thermal noise and mechanical loss of SiO${}_2$/Ta${}_2$O${}_5$ optical coatings at cryogenic temperatures
• Characterization of the long-term dimensional stability of a NEXCERA block using the optical resonator technique
• Mechanical loss and stability analysis of NEXCERA in ultra-stable optical cavities
• Guidelines for designs for ultrastable laser with $10^{-17}$ fractional frequency instability