Providing 1E-16 short-term stability of a 1.5 μm laser to optical clocks
arXiv:1208.1634 · doi:10.1109/TIM.2013.2242597
Abstract
We report on transferring 1E-16-level fractional frequency stability of a "master laser" operated at 1.5 μm to a "slave laser" operated at 698 nm, using a femtosecond fiber comb as transfer oscillator. With the 698 nm laser, the 1S_0 - 3P_0 clock transition of 87Sr was resolved to a Fourier-limited line width of 1.5 Hz (before: 10 Hz). Potential noise sources contributed by the frequency comb are discussed in detail.
References in corpus (15)
- Frequency Comparison of Two High-Accuracy Al+ Optical Clocks
- A sub-40 mHz linewidth laser based on a silicon single-crystal optical cavity
- Making optical atomic clocks more stable with level laser stabilization
- Kerr-lens mode-locked lasers as transfer oscillators for optical frequency measurements
- High-accuracy optical clock based on the octupole transition in 171Yb+
- Optical frequency transfer via 146 km fiber link with 10^{-19} relative accuracy
- Thermal noise in optical cavities revisited
- Frequency-stabilization to 6x10^-16 via spectral-hole burning
- The 87-Sr optical frequency standard at PTB
- Collisional losses, decoherence, and frequency shifts in optical lattice clocks with bosons
- Demonstration of a Transportable 1 Hz-Linewidth Laser
- Delivering pulsed and phase stable light to atoms of an optical clock
- Stability Transfer between Two Clock Lasers Operating at Different Wavelengths for Absolute Frequency Measurement of Clock Transition in 87Sr
- Optical frequency synthesis and measurement using fibre-based femtosecond lasers
- Interrogation laser for a strontium lattice clock
Cited by in corpus (20)
- 1.5 m lasers with sub 10 mHz linewidth
- Experimenting an optical second with strontium lattice clocks
- A strontium lattice clock with inaccuracy and its frequency
- A high-performance optical lattice clock based on bosonic atoms
- Spectral purity transfer between optical wavelengths at the level
- Noise and instability of an optical lattice clock
- Ultra-stable laser with average fractional frequency drift rate below
- Long term measurement of the Sr clock frequency at the limit of primary Cs clocks
- Photonic-chip supercontinuum with tailored spectra for precision frequency metrology
- End-to-end topology for fiber comb based optical frequency transfer at the level
- Spectroscopy and frequency measurement of the Sr clock transition by laser linewidth transfer using an optical frequency comb
- A strontium optical lattice clock with uncertainty and measurement of its absolute frequency
- Modified hyper-Ramsey methods for the elimination of probe shifts in optical clocks
- Evaluating the performance of the NPL femtosecond frequency combs: Agreement at the level
- Polarizabilities of the 87Sr Clock Transition
- All-polarization-maintaining, single-port Er:fiber comb for high-stability comparison of optical lattice clocks
- Strontium optical lattice clocks for practical realization of the metre and secondary representation of the second
- 946-nm Nd:YAG digital-locked laser at in 1 s and transfer-locked to a cryogenic silicon cavity
- Optically loaded Strontium lattice clock with a single multi-wavelength reference cavity
- Analytically exploiting noise correlations inside the feedback loop to improve locked-oscillator performance