Thermo-optic noise in coated mirrors for high-precision optical measurements
arXiv:0807.4774 · doi:10.1103/PhysRevD.78.102003
Abstract
Thermal fluctuations in the coatings used to make high-reflectors are becoming significant noise sources in precision optical measurements and are particularly relevant to advanced gravitational wave detectors. There are two recognized sources of coating thermal noise, mechanical loss and thermal dissipation. Thermal dissipation causes thermal fluctuations in the coating which produce noise via the thermo-elastic and thermo-refractive mechanisms. We treat these mechanisms coherently, give a correction for finite coating thickness, and evaluate the implications for Advanced LIGO.
References in corpus (7)
- Internal thermal noise in the LIGO test masses : a direct approach
- Compact, thermal-noise-limited optical cavity for diode laser stabilization at 1 x 10-15
- Titania-doped tantala/silica coatings for gravitational-wave detection
- Thermo-refractive noise in gravitational wave antennae
- Thermoelastic Noise and Homogeneous Thermal Noise in Finite Sized Gravitational-Wave Test Masses
- Thermoelastic dissipation in inhomogeneous media: loss measurements and displacement noise in coated test masses for interferometric gravitational wave detectors
- Thermodynamical fluctuations in optical mirror coatings
Cited by in corpus (63)
- Advanced LIGO
- Gravitational Radiation Detection with Laser Interferometry
- Macroscopic Quantum Mechanics: Theory and Experimental Concepts of Optomechanics
- Neutron Star Extreme Matter Observatory: A kilohertz-band gravitational-wave detector in the global network
- A Cryogenic Silicon Interferometer for Gravitational-wave Detection
- Quantum Measurement Theory in Gravitational-Wave Detectors
- Prospects for doubling the range of Advanced LIGO
- Thermal noise in optical cavities revisited
- Gravitational-wave physics with Cosmic Explorer: limits to low-frequency sensitivity
- Brownian Thermal Noise in Multilayer Coated Mirrors
- Multi-Material Coatings with Reduced Thermal Noise
- Thermal noises and noise compensation in high-reflection multilayer coating
- Optical Interferometers with Reduced Sensitivity to Thermal Noise
- Quantum state preparation and macroscopic entanglement in gravitational-wave detectors
- Direct Measurement of Coating Thermal Noise in Optical Resonators
- Coherent Cancellation of Photothermal Noise in GaAs/AlGaAs Bragg Mirrors
- Audio-band Coating Thermal Noise Measurement for Advanced LIGO with a Multi-mode Optical Resonator
- Excess noise and photo-induced effects in highly reflective crystalline mirror coatings
- Fundamental thermal noise limits for optical microcavities
- Design of a speed meter interferometer proof-of-principle experiment
- Quantum sensing with milligram scale optomechanical systems
- Photothermal and thermo-refractive effects in high reflectivity mirrors at room and cryogenic temperature
- Exploration of co-sputtered TaO-ZrO thin films for gravitational-wave detectors
- Resonant Dampers for Parametric Instabilities in Gravitational Wave Detectors
- Noise characterization for resonantly-enhanced polarimetric vacuum magnetic-birefringence experiments
- Effect of interference on thermal noise and coating optimization in dielectric mirrors
- Quantum correlation measurements in interferometric gravitational wave detectors
- Coating thermal noise of a finite-size cylindrical mirror
- A Direct Approach for the Fluctuation-Dissipation Theorem under Non-Equilibrium Steady-State Conditions
- Multi-color Cavity Metrology
- Technology for the next gravitational wave detectors
- Highly reflective low-noise etalon-based meta-mirror
- Investigation of the Young's modulus and thermal expansion of amorphous titania-doped tantala films
- Observation of photo-thermal feed-back in a stable dual-carrier optical spring
- Mirror thermal noise in laser interferometer gravitational wave detectors operating at room and cryogenic temperature
- Calculation of thermal noise in grating reflectors
- Molecular adsorbed layer formation on cooled mirrors and its impacts on cryogenic gravitational wave telescopes
- Photo-Thermal Transfer Function of Dielectric Mirrors for Precision Measurements
- Opportunities and limits of lunar gravitational-wave detection
- Photon Counting Interferometry to Detect Geontropic Space-Time Fluctuations with GQuEST
- Reducing Thermal Noise in Future Gravitational Wave Detectors by employing Khalili Etalons
- Broadband Measurement of Coating Thermal Noise in Rigid Fabry-Perot Cavities
- Numerically modeling Brownian thermal noise in amorphous and crystalline thin coatings
- Tenfold reduction of Brownian noise in optical interferometry
- Thermorefringent noise in crystalline optical materials
- Radiative Thermal Noise for Transmissive Optics in Gravitational-Wave Detectors
- Improving the stability of frequency dependent squeezing with bichromatic control of filter cavity length, alignment and incident beam pointing
- Optical back-action on the photothermal relaxation rate
- Study on electro-optic noise in crystalline coatings toward future gravitational wave detectors
- Potential mechanical loss mechanisms in bulk materials for future gravitational wave detectors
- Advanced technologies for future ground-based, laser-interferometric gravitational wave detectors
- Strategies to reduce the thermoelastic loss of multimaterial coated finite substrates
- GALILEO: Galactic Axion Laser Interferometer Leveraging Electro-Optics
- Cancellation of photothermally induced instability in an optical resonator
- Folding Gravitational-Wave Interferometers
- Reduction and possible elimination of coating thermal noise using a rigidly controlled cavity with a QND technique
- Picometer Sensitive Prototype of the Optical Truss Interferometer for LISA
- Thermal-noise Limits to the Frequency Stability of Burned Spectral Holes
- Impact of Earth's gravity on Gaussian beam propagation in hemispherical cavities
- Spontaneous crystallization noise in mirrors of gravitational wave detectors
- Modeling Photothermal Effects in High Power Optical Resonators used for Coherent Levitation
- Birefringence of AlGaAs/GaAs Coatings under Above-Band-Gap Illumination, GR Noise and Photo-Optic Transfer Function
- Terrestrial Laser Interferometers