paper

Over 6 m thick MOCVD-grown Low-Background Carrier Density (10 cm) High-Mobility (010) -GaO Drift Layers

arXiv:2311.14253

Abstract

This work reports high carrier mobilities and growth rates, simultaneously in low unintentionally-doped UID (10 cm) MOCVD-grown thick -GaO epitaxial drift layers, with thicknesses reaching up to 6.3 m, using triethylgallium (TEGa) as a precursor. Record high room temperature Hall mobilities of 187-190 cm/Vs were measured for background carrier density values of 2.4 - 3.510 cm grown at a rate of 2.2 m/hr. A controlled background carrier density scaling from 3.310 cm to 2.410 cm is demonstrated, without the use of intentional dopant gases such as silane, by controlling the growth rate and O/TEGa ratio. Films show smooth surface morphologies of 0.8-3.8 nm RMS roughness for film thicknesses of 1.24 - 6.3m. Vertical Ni Schottky barrier diodes (SBDs) fabricated on UID MOCVD material were compared with those fabricated on hydride vapor phase epitaxy (HVPE) material, revealing superior material and device characteristics. MOCVD SBDs on a 6.3 m thick epitaxial layer show a uniform charge vs. depth profile of 2.410 cm, an estimated of 132 cm/Vs, a breakdown voltage (V) close to 1.2 kV and a surface parallel plane field of 2.05MV/cm without any electric field management - setting record-high parameters for any MOCVD-grown -GaO vertical diode to date.

14 pages, 14 figures, 1 table