Disentangling Losses in Tantalum Superconducting Circuits
arXiv:2301.07848 · doi:10.1103/PhysRevX.13.041005
Abstract
Superconducting qubits are a leading system for realizing large scale quantum processors, but overall gate fidelities suffer from coherence times limited by microwave dielectric loss. Recently discovered tantalum-based qubits exhibit record lifetimes exceeding 0.3 ms. Here we perform systematic, detailed measurements of superconducting tantalum resonators in order to disentangle sources of loss that limit state-of-the-art tantalum devices. By studying the dependence of loss on temperature, microwave photon number, and device geometry, we quantify materials-related losses and observe that the losses are dominated by several types of saturable two level systems (TLSs), with evidence that both surface and bulk related TLSs contribute to loss. Moreover, we show that surface TLSs can be altered with chemical processing. With four different surface conditions, we quantitatively extract the linear absorption associated with different surface TLS sources. Finally, we quantify the impact of the chemical processing at single photon powers, the relevant conditions for qubit device performance. In this regime we measure resonators with internal quality factors ranging from 5 to 15 x 10^6, comparable to the best qubits reported. In these devices the surface and bulk TLS contributions to loss are comparable, showing that systematic improvements in materials on both fronts will be necessary to improve qubit coherence further.
References in corpus (7)
- Real-time quantum error correction beyond break-even
- Optomechanical sideband cooling of a micromechanical oscillator close to the quantum ground state
- Characterization and reduction of microfabrication-induced decoherence in superconducting quantum circuits
- Direct identification of dilute surface spins on AlO: Origin of flux noise in quantum circuits
- Microwave Package Design for Superconducting Quantum Processors
- Temperature Dependence of the Frequency and Noise of Superconducting Coplanar Waveguide Resonators
- Chemical profiles of the oxides on tantalum in state of the art superconducting circuits
Cited by in corpus (36)
- Chemical profiles of the oxides on tantalum in state of the art superconducting circuits
- High-Coherence Kerr-cat qubit in 2D architecture
- Shaping photons: quantum computation with bosonic cQED
- Microwave characterization of tantalum superconducting resonators on silicon substrate with niobium buffer layer
- Manufacturing high-Q superconducting α-tantalum resonators on silicon wafers
- Acceptor-induced bulk dielectric loss in superconducting circuits on silicon
- Characterization of process-related interfacial dielectric loss in aluminum-on-silicon by resonator microwave measurements, materials analysis, and imaging
- Nonequilibrium quasiparticle distribution in superconducting resonators: effect of pair-breaking photons
- Observation of discrete charge states of a coherent two-level system in a superconducting qubit
- Characterization of drive-induced unwanted state transitions in superconducting circuits
- Thin-film quartz for high-coherence piezoelectric phononic crystal resonators
- Preserving phase coherence and linearity in cat qubits with exponential bit-flip suppression
- Magnetic bound states embedded in tantalum superconducting thin films
- Loss tangent fluctuations due to two-level systems in superconducting microwave resonators
- Magnetic Field Tolerant Superconducting Spiral Resonators for Circuit QED
- Low-loss Millimeter-wave Resonators with an Improved Coupling Structure
- Dielectric Loss due to Charged-Defect Acoustic Phonon Emission
- Sub-Harmonic Control of a Fluxonium Qubit via a Purcell-Protected Flux Line
- Role of Oxygen in Laser Induced Contamination at Diamond-Vacuum Interfaces
- Suppressed paramagnetism in amorphous TaO oxides and its link to superconducting qubit performance
- Growth and characterization of single crystal cubic TaN and hexagonal TaN films on c-plane Sapphire
- Low-loss liquid metal interconnects for superconducting quantum circuits
- Quasiparticle spectroscopy in technologically-relevant niobium using London penetration depth measurements
- Disentangling the Impact of Quasiparticles and Two-Level Systems on the Statistics of Superconducting Qubit Lifetime
- Exploring van der Waals cuprate superconductors using a hybrid microwave circuit
- Bidirectional microwave-optical conversion with an integrated soft-ferroelectric barium titanate transducer
- Low-loss Nb on Si superconducting resonators from a dual-use spintronics deposition chamber and with acid-free post-processing
- Detector of microwave photon pairs based on a Josephson photomultiplier
- Quantum Internet: Resource Estimation for Entanglement Routing
- In situ AlO passivation of epitaxial tantalum and aluminum films enables long-term stability in superconducting microwave resonators
- Investigation of tantalum films growth for coplanar resonators with internal quality factors above ten million
- Fabrication effects on Niobium oxidation and surface contamination in Niobium-metal bilayers using X-ray photoelectron spectroscopy
- Coherence-Mediated Quantum Thermometry in a Hybrid Circuit-QED Architecture
- Enhanced Tantalum Superconducting Resonator Performance via All-Surface Organic Monolayer Passivation
- Surface Optimization of Superconducting Aluminum Resonators for Robust Quantum Device Fabrication
- Impact of Absorption due to Zero-Field Splitting on Loss in Dielectrics: A Case Study in Sapphire