Enhanced Tantalum Superconducting Resonator Performance via All-Surface Organic Monolayer Passivation
arXiv:2604.22112 · doi:10.1002/adfm.77131
Abstract
Tantalum is a promising platform for superconducting quantum circuits, yet coherence times remain limited by dielectric losses from interfacial two-level systems (TLS), exacerbated by native oxide regrowth. Here, we implement molecular surface passivation using self-assembled organic monolayers on freshly etched tantalum and silicon in coplanar waveguide resonators. Surface characterization by contact angle, XPS, FTIR and TEM confirm the formation of ordered, nanometer-thick films that suppress oxide formation. Microwave measurements in the ~5-9 GHz range reveal internal quality factors up to 1.8x10^6 in the single-photon regime at 100 mK, representing a ~140% improvement over untreated devices with native oxide. Power and temperature dependent measurements attribute this enhancement to reduced TLS-induced losses. These results demonstrate that molecular passivation effectively engineers low-loss interfaces and provides a scalable route toward high-coherence superconducting quantum devices.
References in corpus (35)
- Quantum sensing
- Circuit Quantum Electrodynamics: Coherent Coupling of a Single Photon to a Cooper Pair Box
- Cavity quantum electrodynamics for superconducting electrical circuits: an architecture for quantum computation
- Manipulating the Quantum State of an Electrical Circuit
- Coherent dynamics of a flux qubit coupled to a harmonic oscillator
- Coherent quantum state storage and transfer between two phase qubits via a resonant cavity
- New material platform for superconducting transmon qubits with coherence times exceeding 0.3 milliseconds
- Towards understanding two-level-systems in amorphous solids -- Insights from quantum circuits
- Large-area, ensemble molecular electronics: Motivation and challenges
- Transmon qubit with relaxation time exceeding 0.5 milliseconds
- Experimental evidence for a surface distribution of two-level systems in superconducting lithographed microwave resonators
- The Future of Quantum Computing with Superconducting Qubits
- Materials loss measurements using superconducting microwave resonators
- Loss and decoherence due to stray infrared light in superconducting quantum circuits
- Hot non-equilibrium quasiparticles in transmon qubits
- Study of loss in superconducting coplanar waveguide resonators
- Minimal resonator loss for circuit quantum electrodynamics
- Evidence of a nonequilibrium distribution of quasiparticles in the microwave response of a superconducting aluminium resonator
- Systematic Improvements in Transmon Qubit Coherence Enabled by Niobium Surface Encapsulation
- Towards Realizing a Quantum Memory for a Superconducting Qubit: Storage and Retrieval of quantum states
- Quasiparticle relaxation in optically excited high-Q superconducting resonators
- Losses in coplanar waveguide resonators at millikelvin temperatures
- Disentangling Losses in Tantalum Superconducting Circuits
- TLS Dynamics in a Superconducting Qubit Due to Background Ionizing Radiation
- Loss mechanisms in superconducting thin film microwave resonators
- High-coherence superconducting qubits made using industry-standard, advanced semiconductor manufacturing
- Chemical profiles of the oxides on tantalum in state of the art superconducting circuits
- Microwave-induced excess quasiparticles in superconducting resonators measured through correlated conductivity fluctuations
- Criticality-Enhanced Quantum Sensing with a Parametric Superconducting Resonator
- Microwave characterization of tantalum superconducting resonators on silicon substrate with niobium buffer layer
- Low loss hybrid Nb/Au superconducting resonators for quantum circuit applications
- Epitaxial rhenium microwave resonators
- Reversing Hydrogen-Related Loss in -Ta Thin Films for Quantum Device Fabrication
- Why Superconducting Ta Qubits Have Fewer Tunneling Two-Level Systems at the Air-Oxide Interface Than Nb Qubits
- Tantalum thin films sputtered on silicon and on different seed layers: material characterization and coplanar waveguide resonator performance