Improved performance of graphene transistors by strain engineering
arXiv:1312.6142 · doi:10.1088/0957-4484/25/16/165201
Abstract
By means of numerical simulation, we study in this work the effects of uniaxial strain on transport properties of strained graphene heterojunctions and explore the possibility to achieve good performance of graphene transistors using these hetero-channels. It is shown that a finite conduction-gap can open in the strain junctions due to the strain-induced deformation of graphene bandstructure. These hetero-channels are then demonstrated to improve significantly the operation of graphene field-effect-transistors (FETs). In particular, ON/OFF current ratio can reach a value of over 10. In graphene normal FETs, transconductance, though reduced compared to the case of unstrained devices, is still high while good saturation of current can be obtained. This results in high voltage gain and high transition frequency of a few hundreds of GHz for a gate length of 80 nm. In graphene tunneling FETs, subthreshold swing lower than 30 mV/dec, strong non-linear effects such as gate controllable negative differential conductance, and current rectification are observed.
7 pages, 6 figures, submitted
References in corpus (12)
- Electric Field Effect in Atomically Thin Carbon Films
- The electronic properties of graphene
- Ultrahigh electron mobility in suspended graphene
- Energy Band Gap Engineering of Graphene Nanoribbons
- A tight-binding approach to uniaxial strain in graphene
- Ripple Texturing of Suspended Graphene Atomic Membranes
- All-graphene integrated circuits via strain engineering
- Gap opening in graphene by shear strain
- Geometry, mechanics and electronics of singular structures and wrinkles in graphene
- Valley filter in strain engineered graphene
- On the possibility of tunable-gap bilayer graphene FET
- Strain induced conductance modulation in graphene grain boundary