Niobium Air Bridges as Low-Loss Components for Superconducting Quantum Hardware

Abstract

Scaling up superconducting quantum processors requires a high routing density for readout and control lines, relying on low-loss interconnects to maintain design flexibility and device performance. We propose and demonstrate a universal subtractive fabrication process for air bridges based on an aluminum hard mask and niobium as the superconducting film. Using this technology, we fabricate superconducting CPW resonators incorporating multiple niobium air bridges in and across their center conductors. Through rigorous cleaning methods, we achieve mean internal quality factors in the single-photon limit exceeding $Q_{\mathrm{int}}=8.2\times 10^6$. Notably, the loss per air bridge remains below the detection threshold of the resonators. Due to the larger superconducting energy gap of niobium compared to conventional aluminum air bridges, our approach enables stable performance at elevated temperatures and magnetic fields, which we experimentally confirm in temperatures up to 3.9 K and in a magnetic field of up to 1.60 T. Additionally, we utilize air bridges to realize low-loss vacuum-gap capacitors and demonstrate their successful integration into transmon qubits by achieving median qubit lifetimes of $T_1=51.6\mu \text{s}$.

10 pages, 9 figures

References in corpus (20)

• Supplementary information for "Quantum supremacy using a programmable superconducting processor"
• Strong quantum computational advantage using a superconducting quantum processor
• Efficient and robust analysis of complex scattering data under noise in microwave resonators
• Materials loss measurements using superconducting microwave resonators
• Laser-annealing Josephson junctions for yielding scaled-up superconducting quantum processors
• Characterization and Reduction of Capacitive Loss Induced by Sub-Micron Josephson Junction Fabrication in Superconducting Qubits
• Systematic Improvements in Transmon Qubit Coherence Enabled by Niobium Surface Encapsulation
• Characterization and reduction of microfabrication-induced decoherence in superconducting quantum circuits
• Investigation of microwave loss induced by oxide regrowth in high-Q Nb resonators
• Single electron-spin-resonance detection by microwave photon counting
• Extensive characterization of a family of efficient three-qubit gates at the coherence limit
• Magnetic-field resilience of 3D transmons with thin-film Al/AlO${}_x$/Al Josephson junctions approaching 1 T
• Fabrication of airbridges with gradient exposure
• Post-fabrication frequency trimming of coplanar-waveguide resonators in circuit QED quantum processors
• Microscopic metallic air-bridge arrays for connecting quantum devices
• Compact vacuum gap transmon qubits: Selective and sensitive probes for superconductor surface losses
• Tantalum airbridges for scalable superconducting quantum processors
• Aluminum Josephson junction microstructure and electrical properties modification with thermal annealing
• Lower-temperature fabrication of airbridges by grayscale lithography to increase yield of nanowire transmons in circuit QED quantum processors
• Magnetic-field dependence of a Josephson traveling-wave parametric amplifier and integration into a high-field setup