Compact vacuum gap transmon qubits: Selective and sensitive probes for superconductor surface losses

Abstract

State-of-the-art transmon qubits rely on large capacitors which systematically improves their coherence due to reduced surface loss participation. However, this approach increases both the footprint and the parasitic cross-coupling and is ultimately limited by radiation losses - a potential roadblock for scaling up quantum processors to millions of qubits. In this work we present transmon qubits with sizes as low as 36$\times$39$\mu$m${}^2$ with $\gtrsim$100 nm wide vacuum gap capacitors that are micro-machined from commercial silicon-on-insulator wafers and shadow evaporated with aluminum. After the release in HF vapor we achieve a vacuum participation ratio up to 99.6\% in an in-plane design that is compatible with standard coplanar circuits. Qubit relaxation time measurements for small gaps with high vacuum electric fields of up to 22 V/m reveal a double exponential decay indicating comparably strong coupling to long-lived two-level-systems (TLS). The exceptionally high selectivity of $>$20 dB to the superconductor-vacuum surface allows to precisely back out the sub-single-photon dielectric loss tangent of aluminum oxide exposed to ambient conditions. In terms of future scaling potential we achieve a qubit quality factor by footprint area of $20\mu {\mathrm{s}}^{-2}$, which is on par with the highest $T_1$ devices relying on larger geometries and expected to improve substantially for lower loss superconductors like NbTiN, TiN or Ta.

References in corpus (45)

• Supplementary information for "Quantum supremacy using a programmable superconducting processor"
• Charge insensitive qubit design derived from the Cooper pair box
• Circuit Quantum Electrodynamics
• Logic gates at the surface code threshold: Superconducting qubits poised for fault-tolerant quantum computing
• Observation of high coherence in Josephson junction qubits measured in a three-dimensional circuit QED architecture
• New material platform for superconducting transmon qubits with coherence times exceeding 0.3 milliseconds
• Detecting arbitrary quantum errors via stabilizer measurements on a sublattice of the surface code
• Planar Superconducting Resonators with Internal Quality Factors above One Million
• Transmon qubit with relaxation time exceeding 0.5 milliseconds
• Surface participation and dielectric loss in superconducting qubits
• Fluctuations of Energy-Relaxation Times in Superconducting Qubits
• Decoherence benchmarking of superconducting qubits
• Study of loss in superconducting coplanar waveguide resonators
• Surface loss simulations of superconducting coplanar waveguide resonators
• Resolving catastrophic error bursts from cosmic rays in large arrays of superconducting qubits
• Design of Optomechanical Cavities and Waveguides on a Simultaneous Bandgap Phononic-Photonic Crystal Slab
• Observation of directly interacting coherent two-level systems in a solid
• Analysis and mitigation of interface losses in trenched superconducting coplanar waveguide resonators
• Determining interface dielectric losses in superconducting coplanar waveguide resonators
• Suppressing relaxation in superconducting qubits by quasiparticle pumping
• Minimal resonator loss for circuit quantum electrodynamics
• Multi-mode ultra-strong coupling in circuit quantum electrodynamics
• Investigating surface loss effects in superconducting transmon qubits
• Losses in coplanar waveguide resonators at millikelvin temperatures
• Improving the Quality Factor of Microwave Compact Resonators by Optimizing their Geometrical Parameters
• Etch Induced Microwave Losses in Titanium Nitride Superconducting Resonators
• Quantum Electromechanics on Silicon Nitride Nanomembranes
• Low-loss superconducting resonant circuits using vacuum-gap-based microwave components
• Engineering superconducting qubits to reduce quasiparticles and charge noise
• Microscopic interpretation of the Dynes formula for the tunneling density of states
• Projected dipole moments of individual two-level defects extracted using circuit quantum electrodynamics
• High coherence superconducting microwave cavities with indium bump bonding
• Merged-Element Transmons: Design and Qubit Performance
• Precision measurement of the microwave dielectric loss of sapphire in the quantum regime with parts-per-billion sensitivity
• Two-level system hyperpolarization using a quantum Szilard engine
• Suspending superconducting qubits by silicon micromachining
• Miniaturizing transmon qubits using van der Waals materials
• Observation of Autler-Townes effect in a dispersively dressed Jaynes-Cummings system
• Low-Loss Superconducting Nanowire Circuits Using a Neon Focused Ion Beam
• Superconducting qubits on silicon substrates for quantum device integration
• Probing hundreds of individual quantum defects in polycrystalline and amorphous alumina
• Vacuum-Gap Capacitors for Low-Loss Superconducting Resonant Circuits
• Cavity quantum electrodynamics using a near-resonance two-level system: emergence of the Glauber state
• Stabilizing and improving qubit coherence by engineering noise spectrum of two-level systems
• Dynamical Decoupling of Quantum Two-Level Systems by Coherent Multiple Landau-Zener Transitions

Cited by in corpus (4)

• Quantum collective motion of macroscopic mechanical oscillators
• Acceptor-induced bulk dielectric loss in superconducting circuits on silicon
• Niobium Air Bridges as Low-Loss Components for Superconducting Quantum Hardware
• Conductivity Freeze-Out in Isotopically Pure Si-28 at milli-Kelvin Temperatures