A novel mechanical design of a bolometric array for the CROSS double-beta decay experiment

Abstract

The CROSS experiment will search for neutrinoless double-beta decay using a specific mechanical structure to hold thermal detectors. The design of the structure was tuned to minimize the background contribution, keeping an optimal detector performance. A single module of the structure holds two scintillating bolometers (with a crystal size of 45x45x45 mm and a Ge slab facing the crystal's upper side) in the Cu frame, allowing for a modular construction of a large-scale array. Two designs are released: the initial $Thick$ version contains around 15% of Cu over the crystal mass (lithium molybdate, LMO), while this ratio is reduced to ~6% in a finer ($Slim$) design. Both designs were tested extensively at aboveground (IJCLab, France) and underground (LSC, Spain) laboratories. In particular, at LSC we used a pulse-tube-based CROSS facility to operate a 6-crystal array of LMOs enriched/depleted in ${}^{100}$Mo. The tested LMOs show high spectrometric performance in both designs; notably, the measured energy resolution is 5--7 keV FWHM at 2615 keV $\gamma$s, nearby the Q-value of ${}^{100}$Mo (3034 keV). Due to the absence of a reflective cavity around LMOs, a low scintillation signal is detected by Ge bolometers: ~0.3 keV (150 photons) for 1-MeV $\gamma$($\beta$) LMO-event. Despite that, an acceptable separation between $\alpha$ and $\gamma$($\beta$) events is achieved with most devices. The highest efficiency is reached with light detectors in the $Thick$ design thanks to a lower baseline noise width (0.05--0.09 keV RMS) when compared to that obtained in the $Slim$ version (0.10--0.35 keV RMS). Given the pivotal role of bolometric photodetectors for particle identification and random coincidences rejection, we will use the structure here described with upgraded light detectors, featuring thermal signal amplification via the Neganov-Trofimov-Luke effect, as also demonstrated in the present work.

Submitted to JINST; 31 pages, 16 figures, 5 tables

References in corpus (15)

• Toward the discovery of matter creation with neutrinoless double-beta decay
• Background Model of the CUPID-0 Experiment
• Random coincidence of $2\nu 2\beta$ decay events as a background source in bolometric $0\nu 2\beta$ decay experiments
• Low background techniques in bolometers for double-beta decay search
• CUPID: CUORE (Cryogenic Underground Observatory for Rare Events) Upgrade with Particle IDentification
• Charge-to-heat transducers exploiting the Neganov-Trofimov-Luke effect for light detection in rare-event searches
• Rejection of randomly coinciding events in ZnMoO${}_4$ scintillating bolometers
• Cryogenic light detectors with enhanced performance for rare events physics
• The background model of the CUPID-Mo $0\nu \beta \beta$ experiment
• A first test of CUPID prototypal light detectors with NTD-Ge sensors in a pulse-tube cryostat
• High resolution filtering and digitization system for cryogenic bolometric detectors
• Test of ${}^{116}$CdWO${}_4$ and Li${}_2$MoO${}_4$ scintillating bolometers in the CROSS underground facility with upgraded detector suspension
• Twelve-crystal prototype of Li${}_2$MoO${}_4$ scintillating bolometers for CUPID and CROSS experiments
• Li${}_2$${}^{100\text{depl}}$MoO${}_4$ Scintillating Bolometers for Rare-Event Search Experiments
• Data-driven background model for the CUORE experiment

Cited by in corpus (6)

• CUPID, the CUORE Upgrade with Particle IDentification
• Cosmic muon flux attenuation methods for superconducting qubit experiments
• BINGO innovative assembly for background reduction in bolometric $0\nu \beta \beta$ experiments
• Development of large-volume ${}^{130}$TeO${}_2$ bolometers for the CROSS $2\beta$ decay search experiment
• Vibrational sensing at mK temperatures in dry dilution refrigerators using commercial accelerometers for diverse fundamental physics applications
• Cryogenic light detectors with thermal signal amplification for $0\nu \beta \beta$ search experiments