Growth kinetics and substrate stability during high-temperature molecular beam epitaxy of AlN nanowires

Abstract

We study the molecular beam epitaxy of AlN nanowires between 950 and 1215 °C, well above the usual growth temperatures, to identify optimal growth conditions. The nanowires are grown by self-assembly on TiN(111) films sputtered onto Al${}_2$O${}_3$. Above 1100 °C, the TiN film is seen to undergo grain growth and its surface exhibits {111} facets where AlN nucleation preferentially occurs. Modelling of the nanowire elongation rate measured at different temperatures shows that the Al adatom diffusion length is maximised at 1150 °C, which appears to be the optimum growth temperature. However, analysis of the nanowire luminescence shows a steep increase in the deep-level signal already above 1050 °C, associated with O incorporation from the Al${}_2$O${}_3$ substrate. Comparison with AlN nanowires grown on Si, MgO and SiC substrates suggests that heavy doping of Si and O by interdiffusion from the TiN/substrate interface increases the nanowire internal quantum efficiency, presumably due to the formation of a SiN${}_x$ or AlO${}_x$ passivation shell. The outdiffusion of Si and O would also cause the formation of the inversion domains observed in the nanowires. It follows that for optoelectronic and piezoelectric applications, optimal AlN nanowire ensembles should be prepared at 1150 °C on TiN/SiC substrates and will require an ex situ surface passivation.

Main Paper: 13 pages, 5 figures; Supporting Information: 4 pages, 4 figures