Fabrication and surface treatment of electron-beam evaporated niobium for low-loss coplanar waveguide resonators

Abstract

We characterize low-loss electron-beam evaporated niobium thin films deposited under ultra-high vacuum conditions. Slow deposition yields films with a high superconducting transition temperature ($9.20\pm 0.06\mathrm{K}$) as well as a residual resistivity ratio of $4.8$. We fabricate the films into coplanar waveguide resonators to extract the intrinsic loss due to the presence of two-level-system fluctuators using microwave measurements. For a coplanar waveguide resonator gap of $2\mu \mathrm{m}$, the films exhibit filling-factor-adjusted two-level-system loss tangents as low as $1.5\times 10^{-7}$ with single-photon regime internal quality factors in excess of one million after removing native surface oxides of the niobium.

arXiv comment5 pages, 3 figures

References in corpus (26)

• Supplementary information for "Quantum supremacy using a programmable superconducting processor"
• Strong quantum computational advantage using a superconducting quantum processor
• New material platform for superconducting transmon qubits with coherence times exceeding 0.3 milliseconds
• Experimental evidence for a surface distribution of two-level systems in superconducting lithographed microwave resonators
• Quantum Information Scrambling in a Superconducting Qutrit Processor
• Improved superconducting qubit coherence using titanium nitride
• Materials loss measurements using superconducting microwave resonators
• Loss and decoherence due to stray infrared light in superconducting quantum circuits
• Study of loss in superconducting coplanar waveguide resonators
• Protecting superconducting qubits from external sources of loss and heat
• Microwave response of vortices in superconducting thin films of Re and Al
• Analysis and mitigation of interface losses in trenched superconducting coplanar waveguide resonators
• Electric field spectroscopy of material defects in transmon qubits
• Evidence of a nonequilibrium distribution of quasiparticles in the microwave response of a superconducting aluminium resonator
• Investigation of microwave loss induced by oxide regrowth in high-Q Nb resonators
• Two-level systems in superconducting quantum devices due to trapped quasiparticles
• Comparison of Dielectric Loss in Titanium Nitride and Aluminum Superconducting Resonators
• Analysis of high quality superconducting resonators: consequences for TLS properties in amorphous oxides
• Dielectric surface loss in superconducting resonators with flux-trapping holes
• Resolving the positions of defects in superconducting quantum bits
• Geometric Scaling of Two-Level-System Loss in Superconducting Resonators
• Optimization of infrared and magnetic shielding of superconducting TiN and Al coplanar microwave resonators
• Long-lived, radiation-suppressed superconducting quantum bit in a planar geometry
• An argon ion beam milling process for native ${\text{AlO}}_{\text{x}}$ layers enabling coherent superconducting contacts
• Localization and reduction of superconducting quantum coherent circuit losses
• Optical Direct Write of Dolan--Niemeyer-Bridge Junctions for Transmon Qubits

Cited by in corpus (4)

• Nitrogen Plasma Passivated Niobium Resonators for Superconducting Quantum Circuits
• Formation and Microwave Losses of Hydrides in Superconducting Niobium Thin Films Resulting from Fluoride Chemical Processing
• Characterization of process-related interfacial dielectric loss in aluminum-on-silicon by resonator microwave measurements, materials analysis, and imaging
• Low-loss Nb on Si superconducting resonators from a dual-use spintronics deposition chamber and with acid-free post-processing