Optimization of infrared and magnetic shielding of superconducting TiN and Al coplanar microwave resonators

Abstract

We present a systematic study of the effects of shielding on the internal quality factors (Qi) of Al and TiN microwave resonators designed for use in quantum coherent circuits. Measurements were performed in an adiabatic demagnetization refrigerator, where typical magnetic fields of 200 μT are present at the unshielded sample stage. Radiation shielding consisted of 100 mK and 500 mK Cu cans coated with infrared absorbing epoxy. Magnetic shields consisted of Cryoperm 10 and Sn plating of the Cu cans. A 2.7 K radiation can and coaxial thermalization filters were present in all measurements. TiN samples with Qi = $1.3\ast 10^6$ at 100 mK exhibited no significant variation in quality factor when tested with limited shielding. In contrast, Al resonators showed improved Qi with successive shielding, with the largest gains obtained from the addition of the first radiation and magnetic shields and saturating before the addition of Sn plating infrared absorbing epoxy.

8 pages, 3 figures

References in corpus (4)

• Number fluctuations of sparse quasiparticles in a superconductor
• Microwave response of vortices in superconducting thin films of Re and Al
• Characterization and reduction of microfabrication-induced decoherence in superconducting quantum circuits
• Trapping a single vortex and reducing quasiparticles in a superconducting resonator

Cited by in corpus (12)

• Materials loss measurements using superconducting microwave resonators
• Optically-Heralded Entanglement of Superconducting Systems in Quantum Networks
• Rapid and Unconditional Parametric Reset Protocol for Tunable Superconducting Qubits
• Quantum efficiency, purity and stability of a tunable, narrowband microwave single-photon source
• High-Coherence Kerr-cat qubit in 2D architecture
• Fabrication and surface treatment of electron-beam evaporated niobium for low-loss coplanar waveguide resonators
• Manufacturing high-Q superconducting α-tantalum resonators on silicon wafers
• An engineering guide to superconducting quantum circuit shielding
• Material matters in superconducting qubits
• Protocols to measure the non-Abelian Berry phase by pumping a spin qubit through a quantum-dot loop
• Vantablack Shielding of Superconducting Qubit Systems
• Low-loss Material for Infrared Protection of Cryogenic Quantum Applications