A cryogenic continuously rotating half-wave plate for the POLARBEAR-2b cosmic microwave background receiver

Abstract

We present the design and laboratory evaluation of a cryogenic continuously rotating half-wave plate (CHWP) for the POLARBEAR-2b (PB-2b) cosmic microwave background (CMB) receiver, the second installment of the Simons Array. PB-2b will observe at 5,200 m elevation in the Atacama Desert of Chile in two frequency bands centered at 90 and 150 GHz. In order to suppress atmospheric 1/f noise and mitigate systematic effects that arise when differencing orthogonal detectors, PB-2b modulates linear sky polarization using a CHWP rotating at 2 Hz. The CHWP has a 440 mm clear aperture diameter and is cooled to $\approx$ 50 K in the PB-2b receiver cryostat. It consists of a low-friction superconducting magnetic bearing (SMB) and a low-torque synchronous electromagnetic motor, which together dissipate < 2 W. During cooldown, a grip-and-release mechanism centers the rotor to < 0.5 mm, and during continuous rotation, an incremental optical encoder measures the rotor angle with a noise level of 0.1 $\mu rad/\sqrt{\mathrm{Hz}}$. We discuss the experimental requirements for the PB-2b CHWP, the designs of its various subsystems, and the results of its evaluation in the laboratory. The presented CHWP has been deployed to Chile and is expected to see first light on PB-2b in 2020 or 2021.

arXiv commentPREPRINT. Submitted to Review of Scientific Instruments, September 2020. v2 updates refs 41-42

References in corpus (46)

• Nine-Year Wilkinson Microwave Anisotropy Probe (WMAP) Observations: Final Maps and Results
• An All-Sky Analysis of Polarization in the Microwave Background
• Weak Gravitational Lensing of the CMB
• Signature of Gravity Waves in Polarization of the Microwave Background
• A Probe of Primordial Gravity Waves and Vorticity
• Mass Reconstruction with CMB Polarization
• BICEP2 / Keck Array x: Constraints on Primordial Gravitational Waves using Planck, WMAP, and New BICEP2/Keck Observations through the 2015 Season
• Gravitational Lensing Effect on Cosmic Microwave Background Polarization
• Planck 2018 results. IV. Diffuse component separation
• A limit on the detectability of the energy scale of inflation
• Gravitational lensing as a contaminant of the gravity wave signal in CMB
• Separation of Gravitational-Wave and Cosmic-Shear Contributions to Cosmic Microwave Background Polarization
• Planck 2018 results. XI. Polarized dust foregrounds
• The POLARBEAR-2 and the Simons Array Experiment
• CMB Polarization Systematics Due to Beam Asymmetry: Impact on Inflationary Science
• Delensing the CMB with the Cosmic Infrared Background
• A Measurement of the Cosmic Microwave Background Lensing Potential and Power Spectrum from 500 deg${}^2$ of SPTpol Temperature and Polarization Data
• Modulation of CMB polarization with a warm rapidly-rotating half-wave plate on the Atacama B-Mode Search (ABS) instrument
• Direct Signature of Evolving Gravitational Potential from Cosmic Microwave Background
• MAXIPOL: Cosmic Microwave Background Polarimetry Using a Rotating Half-Wave Plate
• A Measurement of the Degree Scale CMB B-mode Angular Power Spectrum with POLARBEAR
• The Simons Observatory: Instrument Overview
• Performance of a continuously rotating half-wave plate on the POLARBEAR telescope
• Improved Performance of TES Bolometers using Digital Feedback
• Results from the Atacama B-mode Search (ABS) Experiment
• Systematic effects from an ambient-temperature, continuously-rotating half-wave plate
• Design and development of an ambient-temperature continuously-rotating achromatic half-wave plate for CMB polarization modulation on the POLARBEAR-2 experiment
• Modeling atmospheric emission for CMB ground-based observations
• Radio-transparent multi-layer insulation for radiowave receivers
• The POLARBEAR-2 and Simons Array Focal Plane Fabrication Status
• A measurement of the CMB E-mode angular power spectrum at subdegree scales from 670 square degrees of POLARBEAR data
• Epoxy-based broadband anti-reflection coating for millimeter-wave optics
• Empirical modelling of the BLASTPol achromatic half-wave plate for precision submillimetre polarimetry
• Polarimetry at millimeter wavelengths with the NIKA camera: calibration and performance
• A Large-Diameter Hollow-Shaft Cryogenic Motor Based on a Superconducting Magnetic Bearing for Millimeter-Wave Polarimetry
• The EBEX Balloon Borne Experiment - Optics, Receiver, and Polarimetry
• Cryogenic infrared filter made of alumina for use at millimeter wavelength
• Time-division SQUID multiplexers with reduced sensitivity to external magnetic fields
• A cryogenic rotation stage with a large clear aperture for the half-wave plates in the Spider instrument
• Analysis of performance of three- and five-stack achromatic half-wave plates at millimeter wavelengths
• Digital frequency domain multiplexing readout electronics for the next generation of millimeter telescopes
• Small Aperture Telescopes for the Simons Observatory
• BoloCalc: a sensitivity calculator for the design of Simons Observatory
• Magnetic Sensitivity of AlMn TESes and Shielding Considerations for Next-Generation CMB Surveys
• Optical Design of the TolTEC Millimeter-wave Camera
• A large-diameter cryogenic rotation stage for half-wave plate polarization modulation on the POLARBEAR-2 experiment

Cited by in corpus (7)

• Improved upper limit on degree-scale CMB B-mode polarization power from the 670 square-degree POLARBEAR survey
• QUBIC VI: cryogenic half wave plate rotator, design and performances
• The Simons Observatory: Development and Optical Evaluation of Achromatic Half-Wave Plates
• Anti-reflection coating with mullite and Duroid for large-diameter cryogenic sapphire and alumina optics
• Multi-dimensional optimisation of the scanning strategy for the LiteBIRD space mission
• A Polarization Modulator Unit for the Mid- and High-Frequency Telescopes of the LiteBIRD mission
• The Simons Observatory: Design, Integration, and Current Status of Small Aperture Telescopes