Radio-transparent multi-layer insulation for radiowave receivers
arXiv:1306.5040 · doi:10.1063/1.4827081
Abstract
In the field of radiowave detection, enlarging the receiver aperture to enhance the amount of light detected is essential for greater scientific achievements. One challenge in using radio transmittable apertures is keeping the detectors cool. This is because transparency to thermal radiation above the radio frequency range increases the thermal load. A technology that maintains cold conditions while allowing larger apertures has been long-awaited. We propose radio-transparent multi-layer insulation (RT-MLI), composed from a set of stacked insulating layers. The insulator is transparent to radio frequencies, but not transparent to infrared radiation. The basic idea for cooling is similar to conventional multi-layer insulation. It leads to a reduction in thermal radiation while maintaining a uniform surface temperature. The advantage of this technique over other filter types is that no thermal links are required. As insulator material, we used foamed polystyrene; its low index of refraction makes an anti-reflection coating unnecessary. We measured the basic performance of RT-MLI to confirm that thermal loads are lowered with more layers. We also confirmed that our RT-MLI has high transmittance to radiowaves, but blocks infrared radiation. For example, RT-MLI with 12 layers has a transmittance greater than 95% (lower than 1%) below 200 GHz (above 4 THz). We demonstrated its effects in a system with absorptive-type filters, where aperture diameters were 200 mm. Low temperatures were successfully maintained for the filters. We conclude that this technology significantly enhances the cooling of radiowave receivers, and is particularly suitable for large-aperture systems. This technology is expected to be applicable to various fields, including radio astronomy, geo-environmental assessment, and radar systems.
arXiv comment7 pages, 8 figures, to appear in Review of Scientific Instruments
References in corpus (3)
Cited by in corpus (13)
- Four-year Cosmology Large Angular Scale Surveyor (CLASS) Observations: On-sky Receiver Performance at 40, 90, 150, and 220 GHz Frequency Bands
- GroundBIRD : A CMB polarization experiment with MKID arrays
- Search for Dark Photon Dark Matter in the Mass Range $74\mbox{--}110\,μ\mathrm{eV}/c^2$ with a Cryogenic Millimeter-Wave Receiver
- 2017 upgrade and performance of BICEP3: a 95GHz refracting telescope for degree-scale CMB polarization
- A cryogenic continuously rotating half-wave plate for the POLARBEAR-2b cosmic microwave background receiver
- The Cosmology Large Angular Scale Surveyor Receiver Design
- QUBIC V: Cryogenic system design and performance
- Search for Dark Photon Dark Matter in the Mass Range 41--74 using Millimeter-Wave Receiver and Radioshielding Box
- Fabry-Pérot open resonant cavities for measuring the dielectric parameters of mm-wave optical materials
- The Precursor Small Aperture Telescope (PreSAT) CMB polarimeter
- The Design and Integrated Performance of SPT-3G
- Development of the new multi-beam receiver and telescope control system for NASCO
- Receiver development for BICEP Array, a next-generation CMB polarimeter at the South Pole