STRIP-PET: a novel detector concept for the TOF-PET scanner
arXiv:1305.5562
Abstract
We briefly present a design of a new PET scanner based on strips of polymer scintillators arranged in a barrel constituting a large acceptance detector. The solution proposed is based on the superior timing properties of the polymer scintillators. The position and time of the reaction of the gamma quanta in the detector material will be determined based on the time of arrival of light signals to the edges of the scintillator strips.
arXiv commentProceedings of the Positron Emission Tomography in Research and Diagnostics conference, Warsaw 16 - 19 May, 2012
Cited by in corpus (9)
- Trilateration-based reconstruction of ortho-positronium decays into three photons with the J-PET detector
- A novel method based solely on FPGA units enabling measurement of time and charge of analog signals in Positron Emission Tomography
- Plastic scintillators for positron emission tomography obtained by the bulk polymerization method
- Overview of the software architecture and data flow for the J-PET tomography device
- Overview of the software architecture and data flow for the J-PET tomography device
- Hit time and hit position reconstruction in the J-PET detector based on a library of averaged model signals
- GPU accelerated image reconstruction in a two-strip J-PET tomograph
- Beam profile investigation of the new collimator system for the J-PET detector
- System Response Kernel Calculation for List-mode Reconstruction in Strip PET Detector