Planck pre-launch status: calibration of the Low Frequency Instrument flight model radiometers
arXiv:1005.2541 · doi:10.1051/0004-6361/200912860
Abstract
The Low Frequency Instrument (LFI) on-board the ESA Planck satellite carries eleven radiometer subsystems, called Radiometer Chain Assemblies (RCAs), each composed of a pair of pseudo-correlation receivers. We describe the on-ground calibration campaign performed to qualify the flight model RCAs and to measure their pre-launch performances. Each RCA was calibrated in a dedicated flight-like cryogenic environment with the radiometer front-end cooled to 20K and the back-end at 300K, and with an external input load cooled to 4K. A matched load simulating a blackbody at different temperatures was placed in front of the sky horn to derive basic radiometer properties such as noise temperature, gain, and noise performance, e.g. 1/f noise. The spectral response of each detector was measured as was their susceptibility to thermal variation. All eleven LFI RCAs were calibrated. Instrumental parameters measured in these tests, such as noise temperature, bandwidth, radiometer isolation, and linearity, provide essential inputs to the Planck-LFI data analysis.
arXiv comment15 pages, 18 figures. Accepted for publication in Astronomy and Astrophysics
References in corpus (17)
- Planck pre-launch status: Design and description of the Low Frequency Instrument
- 1/f noise and other systematic effects in the Planck-LFI radiometers
- Planck pre-launch status: Low Frequency Instrument calibration and expected scientific performance
- Offset balancing in pseudo-correlation radiometers for CMB measurements
- Planck-LFI: Design and Performance of the 4 Kelvin Reference Load Unit
- Planck-LFI radiometers' spectral response
- Design, development and verification of the 30 and 44 GHz front-end modules for the Planck Low Frequency Instrument
- The linearity response of the Planck-LFI flight model receivers
- Design, development, and verification of the Planck Low Frequency Instrument 70 GHz Front-End and Back-End Modules
- LFI 30 and 44 GHz receivers Back-End Modules
- Planck LFI flight model feed horns
- Planck-LFI radiometers tuning
- Thermal susceptibility of the Planck-LFI receivers
- The Planck-LFI flight model composite waveguides
- The PLANCK LFI flight model ortho-mode transducers
- Cryogenic environment and performance for testing the Planck radiometers
- LFI Radiometric Chain Assembly (RCA) data handling "Rachel"
Cited by in corpus (9)
- Planck intermediate results. LVII. Joint Planck LFI and HFI data processing
- Planck pre-launch status: Design and description of the Low Frequency Instrument
- Planck early results. III. First assessment of the Low Frequency Instrument in-flight performance
- Planck pre-launch status: the Planck-LFI programme
- Planck 2013 results. V. LFI calibration
- Planck pre-launch status: Low Frequency Instrument calibration and expected scientific performance
- BeyondPlanck VI. Noise characterization and modelling
- In-flight calibration and verification of the Planck-LFI instrument
- MNTES: Modeling Nonlinearity of TES detectors for Enhanced Cosmic Microwave Background measurements with LiteBIRD