CMS Barrel Pixel Detector Overview

Abstract

The pixel detector is the innermost tracking device of the CMS experiment at the LHC. It is built from two independent sub devices, the pixel barrel and the end disks. The barrel consists of three concentric layers around the beam pipe with mean radii of 4.4, 7.3 and 10.2 cm. There are two end disks on each side of the interaction point at 34.5 cm and 46.5 cm. This article gives an overview of the pixel barrel detector, its mechanical support structure, electronics components, services and its expected performance.

Proceedings of Vertex06, 15th International Workshop on Vertex Detectors

References in corpus (3)

• Design and Performance of the CMS Pixel Detector Readout Chip
• Development of an Indium Bump Bond Process for Silicon Pixel Detectors at PSI
• Building CMS Pixel Barrel Detectur Modules

Cited by in corpus (13)

• A review of advances in pixel detectors for experiments with high rate and radiation
• Signal and noise of Diamond Pixel Detectors at High Radiation Fluences
• Neutron irradiation test of depleted CMOS pixel detector prototypes
• Pixel Detectors for Charged Particles
• Science Case for the new High-Intensity Muon Beams HIMB at PSI
• Charge collection properties of irradiated depleted CMOS pixel test structures
• Pixel Detectors ... where do we stand?
• Charge collection properties in an irradiated pixel sensor built in a thick-film HV-SOI process
• Building CMS Pixel Barrel Detectur Modules
• From Hybrid to CMOS Pixels ... a possibility for LHC's pixel future?
• Mechanical Design and Material Budget of the CMS Barrel Pixel Detector
• Characterization of a Single Crystal Diamond Pixel Detector in a High Energy Particle Beam
• Radiation experience with the CMS pixel detector