Optimizing CMOS-compatible, superconducting titanium nitride resonators: Deposition conditions and structuring processes

Abstract

We report on the fabrication and characterization of superconducting coplanar waveguide (CPW) resonators based on titanium nitride (TiN) thin films deposited on 200\,mm diameter high-resistivity Si(100) substrates. We systematically investigate how deposition conditions, dry-etch power and in-situ resist strip temperature affect morphology, superconducting properties and dielectric losses. By tuning reactive sputtering conditions, three distinct preferred out-of-plane crystal orientations - (111), (200), and a mix of both are achieved. Our results demonstrate that all films exhibit similar minimal two-level system (TLS) losses, with TiN111 exhibiting the lowest median TLS losses ${\tilde{\delta }}_{\mathrm{TLS}}$, and greater robustness against reoxidation. The applied structuring process, in contrast, has a far greater influence on the TLS loss than the crystal orientation of the TiN film and, consequently, the intrinsic material properties of the superconducting layer. The lowest TLS losses for all TiN depositions were achieved with a low power etch and low temperature resist strip. An additional buffered oxide etch (BOE) treatment could remove high-loss interfacial oxides at the metal-air (MA) and substrate-air (SA) interface and recover the etch-induced TLS losses. Consequently, TiN resonators exhibiting ${\tilde{\delta }}_{\mathrm{TLS}}$ values as low as $9.67\times 10^{-7}$ were realized. The corresponding median low-power loss, ${\tilde{\delta }}_{\mathrm{LP}}$, amounts to $11.04\times 10^{-7}$, which translates to an internal quality factor approaching one million. These findings highlight the critical role of process induced oxide formation at the MA and SA interfaces in limiting the performance of TiN resonators and provide a scalable, low-loss process compatible with industry-grade 200\,mm CMOS qubit fabrication workflows.

10 pages, 10 figures

References in corpus (23)

• Supplementary information for "Quantum supremacy using a programmable superconducting processor"
• Quantum Mechanics helps in searching for a needle in a haystack
• Surface codes: Towards practical large-scale quantum computation
• Decoherence in Josephson Qubits from Dielectric Loss
• Towards understanding two-level-systems in amorphous solids -- Insights from quantum circuits
• Experimental evidence for a surface distribution of two-level systems in superconducting lithographed microwave resonators
• Coplanar Waveguide Resonators for Circuit Quantum Electrodynamics
• Surface participation and dielectric loss in superconducting qubits
• Efficient and robust analysis of complex scattering data under noise in microwave resonators
• Microwave Dielectric Loss at Single Photon Energies and milliKelvin Temperatures
• Improved superconducting qubit coherence using titanium nitride
• Reducing intrinsic loss in superconducting resonators by surface treatment and deep etching of silicon substrates
• Surface loss simulations of superconducting coplanar waveguide resonators
• Low Loss Superconducting Titanium Nitride Coplanar Waveguide Resonators
• Analysis and mitigation of interface losses in trenched superconducting coplanar waveguide resonators
• Determining interface dielectric losses in superconducting coplanar waveguide resonators
• Characterization and Reduction of Capacitive Loss Induced by Sub-Micron Josephson Junction Fabrication in Superconducting Qubits
• Solid-state qubits integrated with superconducting through-silicon vias
• Characterization and reduction of microfabrication-induced decoherence in superconducting quantum circuits
• Investigation of microwave loss induced by oxide regrowth in high-Q Nb resonators
• Etch Induced Microwave Losses in Titanium Nitride Superconducting Resonators
• Mitigation of interfacial dielectric loss in aluminum-on-silicon superconducting qubits
• High temporal stability of niobium superconducting resonators by surface passivation with organophosphonate self-assembled monolayers