A chip-integrated comb-based microwave oscillator
arXiv:2403.02828 · doi:10.1038/s41377-025-01795-0
Abstract
Low-noise microwave oscillators are cornerstones for wireless communication, radar and clocks. Optical frequency combs have enabled photonic microwaves with unrivalled noise performance and bandwidth. Emerging interest is to generate microwaves using chip-based frequency combs, namely microcombs. Here, we demonstrate the first, fully integrated, microcomb-based, microwave oscillator chip. The chip, powered by a microelectronic circuit, leverages hybrid integration of a DFB laser, a nonlinear microresonator, and a high-speed photodetector. Each component represents the best of its own class, yet allows large-volume manufacturing with low cost in CMOS foundries. The hybrid chip outputs an ultralow-noise laser of 6.9 Hz linewidth, a microcomb of 10.7 GHz repetition rate, and a 10.7 GHz microwave of 6.3 mHz linewidth -- all three in one entity of 76 mm size.The microwave phase noise reaches -75/-105/-130 dBc/Hz at 1/10/100 kHz Fourier offset frequency. Our results can reinvigorate our information society for communication, sensing, timing and precision measurement.
References in corpus (35)
- Temporal solitons in optical microresonators
- All-optical signal processing platforms for CMOS compatible integrated nonlinear optics
- 20 years of developments in optical frequency comb technology and applications
- Photonic chip based optical frequency comb using soliton induced Cherenkov radiation
- Generation of Ultrastable Microwaves via Optical Frequency Division
- Fully integrated ultra-low power Kerr comb generation
- Mode interaction aided excitation of dark solitons in microresonators constructed of normal dispersion waveguides
- Integrated turnkey soliton microcombs operated at CMOS frequencies
- Hertz-linewidth semiconductor lasers using CMOS-ready ultra-high- microresonators
- Nanophotonic soliton-based microwave synthesizers
- Photonic microwave signals with zeptosecond level absolute timing noise
- Thermally Controlled Comb Generation and Soliton Modelocking in Microresonators
- High-yield wafer-scale fabrication of ultralow-loss, dispersion-engineered silicon nitride photonic circuits
- Laser soliton microcombs on silicon
- Microresonator Kerr frequency combs with high conversion efficiency
- Overcoming Si3N4 film stress limitations for High Quality factor ring resonators
- Electrically pumped photonic integrated soliton microcomb
- Frequency combs and platicons in optical microresonators with normal GVD
- Single-mode dispersive waves and soliton microcomb dynamics
- Monolithic piezoelectric control of soliton microcombs
- Dynamics of soliton self-injection locking in a photonic chip-based microresonator
- Mode-locked ultrashort pulse generation from on-chip normal dispersion microresonators
- 300 GHz wave with attosecond-level timing noise
- Coherent Optical Clock Down-Conversion for Microwave Frequencies with 10-18 Instability
- Recent Advances in Laser Self-Injection Locking to High- Microresonators
- Platicon microcomb generation using laser self-injection locking
- Emerging material systems for integrated optical Kerr frequency combs
- Origin and stability of dark pulse Kerr combs in normal dispersion resonators
- Foundry manufacturing of tight-confinement, dispersion-engineered, ultralow-loss silicon nitride photonic integrated circuit
- Towards high-power, high-coherence, integrated photonic mmWave platform with microcavity solitons
- Switching dynamics of dark-pulse Kerr comb states in optical microresonators
- Dark breathers in a normal dispersion optical microresonator
- A unified approach to mode splitting and scattering loss in high-Q whispering-gallery-mode microresonators
- A wideband, high-resolution vector spectrum analyzer for integrated photonics
- Microresonator-referenced soliton microcombs with zeptosecond-level timing noise