Development of transmon qubits solely from optical lithography on 300mm wafers
arXiv:1902.08501 · doi:10.1088/2058-9565/ab0ca8
Abstract
Qubit information processors are increasing in footprint but currently rely on e-beam lithography for patterning the required Josephson junctions (JJs). Advanced optical lithography is an alternative patterning method, and we report on the development of transmon qubits patterned solely with optical lithography. The lithography uses 193 nm wavelength exposure and 300-mm large silicon wafers. Qubits and arrays of evaluation JJs were patterned with process control which resulted in narrow feature distributions: a standard deviation of 0:78% for a 220 nm linewidth pattern realized across over half the width of the wafers. Room temperature evaluation found a 2.8-3.6% standard deviation in JJ resistance in completed chips. The qubits used aluminum and titanium nitride films on silicon substrates without substantial silicon etching. T1 times of the qubits were extracted at 26 - 27 microseconds, indicating a low level of material-based qubit defects. This study shows that large wafer optical lithography on silicon is adequate for high-quality transmon qubits, and shows a promising path for improving many-qubit processors.
7 pages, 4 figures, submitted to Quantum Science and Technology
References in corpus (8)
- Superconducting qubit in waveguide cavity with coherence time approaching 0.1ms
- Detecting arbitrary quantum errors via stabilizer measurements on a sublattice of the surface code
- High-Fidelity Readout in Circuit Quantum Electrodynamics Using the Jaynes-Cummings Nonlinearity
- Reducing intrinsic loss in superconducting resonators by surface treatment and deep etching of silicon substrates
- Observation of directly interacting coherent two-level systems in a solid
- Inductance of Circuit Structures for MIT LL Superconductor Electronics Fabrication Process with 8 Niobium Layers
- Wirebond crosstalk and cavity modes in large chip mounts for superconducting qubits
- Overlap junctions for high coherence superconducting qubits
Cited by in corpus (4)
- High-coherence superconducting qubits made using industry-standard, advanced semiconductor manufacturing
- Path toward manufacturable superconducting qubits with relaxation times exceeding 0.1 ms
- Coherent superconducting qubits from a subtractive junction fabrication process
- Optical Direct Write of Dolan--Niemeyer-Bridge Junctions for Transmon Qubits