Flexible Hall Sensors Based on Graphene

Abstract

The excellent electronic and mechanical properties of graphene provide a perfect basis for high performance flexible electronic and sensor devices. Here, we present the fabrication and characterization of flexible graphene based Hall sensors. The Hall sensors are fabricated on 50 um thick flexible Kapton foil using large scale graphene grown by chemical vapor deposition technique on copper foil. Voltage and current normalized sensitivities of up to 0.096 V/VT and 79 V/AT were measured, respectively. These values are comparable to the sensitivity of rigid silicon based Hall sensors and are the highest values reported so far for any flexible Hall sensor devices. The sensitivity of the Hall sensor shows no degradation after being bent to a minimum radius of 4 mm, which corresponds to a tensile strain of 0.6%, and after 1,000 bending cycles to a radius of 5 mm.

References in corpus (1)

• Ultra-sensitive Hall sensors based on graphene encapsulated in hexagonal boron nitride

Cited by in corpus (6)

• Nanoelectromechanical Sensors based on Suspended 2D Materials
• Optimizing the Stability of FETs Based on Two-Dimensional Materials by Fermi Level Tuning
• Hall sensors batch-fabricated on all-CVD h-BN/graphene/h-BN heterostructures
• Gate-tunable graphene-based Hall sensors on flexible substrates with increased sensitivity
• Gate-tunable Hall sensors on large area CVD graphene protected by h-BN with 1D edge contacts
• Encapsulated graphene based Hall sensors on foil with increased sensitivity