Symmetric Complementary Logic Inverter Using Integrated Black Phosphorus and MoS2 Transistors
arXiv:1508.05413 · doi:10.1088/2053-1583/3/1/011006
Abstract
The operation of an integrated two-dimensional complementary metal-oxide-semiconductor inverter with well-matched input/output voltages is reported. The circuit combines a few-layer MoS2 n-MOSFET and a black phosphorus (BP) p-MOSFET fabricated using a common local backgate electrode with thin (20 nm) HfO2 gate dielectric. The constituent devices have linear threshold voltages of -0.8 V and +0.8 V and produce peak transconductances of 16 uS/um and 41 uS/um for the MoS2 n-MOSFET and BP p-MOSFET, respectively. The inverter shows a voltage gain of 3.5 at a supply voltage, VDD = 2.5 V, and has peak switching current of 108 uA and off-state current of 8.4 uA (2.4 uA) at VIN = 0 (VIN = 2.5 V). In addition, the inverter has voltage gain greater than unity for VDD > 0.5 V, has open butterfly curves for VDD > 1 V, and achieves static noise margin over 500 mV at VDD = 2.5 V. The voltage gain was found to be insensitive to temperature between 270 K and 340 K, and AC large and small-signal operation was demonstrated at frequencies up to 100 kHz. The demonstration of a complementary 2D inverter which operates in a symmetric voltage window suitable for driving a subsequent logic stage is a significant step forward in developing practical applications for devices based upon 2D materials.
References in corpus (8)
- The electronic properties of graphene
- Black phosphorus field-effect transistors
- Phosphorene: A New 2D Material with High Carrier Mobility
- Rediscovering Black Phosphorus: A Unique Anisotropic 2D Material for Optoelectronics and Electronics
- High Performance Single Layered WSe2 p-FETs with Chemically Doped Contacts
- Integrated Circuits Based on Bilayer MoS2 Transistors
- Field-effect transistors and intrinsic mobility in ultra-thin MoSe2 layers
- Field-Effect Transistors Based on Few-Layered alpha-MoTe_2