First studies with the Resistive-Plate WELL gaseous multiplier
arXiv:1308.6152 · doi:10.1088/1748-0221/8/11/P11004
Abstract
We present the results of first studies of the Resistive Plate WELL (RPWELL): a single-faced THGEM coupled to a copper anode via a resistive layer of high bulk resistivity. We explored various materials of different bulk resistivity (10^9 - 10^12 Ohm cm) and thickness (0.4 - 4 mm). Our most successful prototype, with a 0.6 mm resistive plate of ~10^9 Ohm cm, achieved gains of up to 10^5 with 8 keV x-ray in Ne/5%CH4; a minor 30% gain drop occurred with a rate increase from 10 to 10^4 Hz/mm^2. The detector displayed a full "discharge-free" operation--even when exposed to high primary ionization events. We present the RPWELL detector concept and compare its performance to that of other previously explored THGEM configurations--in terms of gain, its curves, dependence on rate, and the response to high ionization. The robust Resistive Plate WELL concept is a step forward in the Micro-Pattern Gas-Detector family, with numerous potential applications.
arXiv commentSubmitted to JINST
References in corpus (18)
- A concise review on THGEM detectors
- Advances in Thick GEM-like gaseous electron multipliers. Part I: atmospheric pressure operation
- Thick GEM-like multipliers - a simple solution for large area UV-RICH detectors
- THGEM operation in Ne and Ne/CH4
- First Tests of Thick GEMs with Electrodes Made of a Resistive Kapton
- Further evaluation of a THGEM UV-photon detector for RICH - comparison with MWPC
- Development of innovative micropattern gaseous detectors with resistive electrodes and first results of their applications
- THGEM-based detectors for sampling elements in DHCAL: laboratory and beam evaluation
- Advances in the Development of Micropattern Gaseous Detectors with Resistive Electrodes
- Beam Studies of the Segmented Resistive WELL: a Potential Thin Sampling Element for Digital Hadron Calorimetry
- Hybrid Multi Micropattern Gaseous Photomultiplier for detection of liquid-xenon scintillation
- A New GEM-like Imaging Detector with Electrodes Coated with Resistive Layers
- Position resolution and efficiency measurements with large scale Thin Gap Chambers for the super LHC
- Measurement of electrical properties of electrode materials for the bakelite Resistive Plate Chambers
- Advances in Micro-Pattern Gaseous Detectors and their Applications
- Development and preliminary tests of resistive microdot and microstrip detectors
- Challenges for RPCs and resistive micropattern detectors in the next few years
- Beam studies of novel THGEM-based potential sampling elements for Digital Hadron Calorimetry
Cited by in corpus (17)
- Laboratory studies of THGEM-based WELL structures with resistive anodes
- Gain stabilization in Micro Pattern Gaseous Detectors: methodology and results
- First in-beam studies of a Resistive-Plate WELL gaseous multiplier
- Recent advances with THGEM detectors
- The Resistive-Plate WELL with Argon mixtures - a robust gaseous radiation detector
- The Thick Gas Electron Multiplier and its derivatives: physics, technologies and applications
- Signal Formation in THGEM-like Detectors
- On the localization properties of an RPWELL gas-avalanche detector
- Novel Resistive-Plate WELL sampling element for (S)DHCAL
- Electrical breakdown in Thick-GEM based WELL detectors
- In-beam evaluation of a medium-size Resistive-Plate WELL gaseous particle detector
- First results of Resistive-Plate Well (RPWELL) detector operation at 163 K
- Evolution and Recent Developments of the Gaseous Photon Detectors Technologies
- Novel resistive charge-multipliers for dual-phase LAr-TPCs: towards stable operation at higher gains
- Discharge mitigation methods in MPGD-based detectors
- Single Electron Spectra in RPWELL-based detectors
- UHECR primary identification using the lateral profile of muons in EAS