Beam studies of novel THGEM-based potential sampling elements for Digital Hadron Calorimetry
arXiv:1305.4657
Abstract
Beam studies of thin single- and double-stage THGEM-based detectors are presented. Several 10 x 10 cm^2 configurations with a total thickness of 5-6 mm (excluding readout electronics), with 1 x 1 cm^2 pads inductively coupled through a resistive layer to APV-SRS readout electronics, were investigated with muons and pions. Detection efficiencies in the 98% range were recorded with an average pad-multiplicity of ~1.1. The resistive anode resulted in efficient discharge damping, with few-volt potential drops; discharge probabilities were ~10^{-7} for muons and 10^{-6} for pions in the double-stage configuration, at rates of a few kHz/cm^2. These results, together with the robustness of THGEM electrodes against spark damage and their suitability for economic production over large areas make THGEM-based detectors highly competitive compared to the other technologies considered for the SiD-DHCAL.
arXiv commentsubmitted to JINST
References in corpus (8)
- A concise review on THGEM detectors
- Thick GEM-like hole multipliers: properties and possible applications
- Advances in Thick GEM-like gaseous electron multipliers. Part I: atmospheric pressure operation
- Measurement of the Rate Capability of Resistive Plate Chambers
- Towards THGEM UV-photon detectors for RICH: on single-photon detection efficiency in Ne/CH4 and Ne/CF4
- CsI-THGEM gaseous photomultipliers for RICH and noble-liquid detectors
- Calibration of a digital hadron calorimeter with muons
- MICROMEGAS chambers for hadronic calorimetry at a future linear collider