THGEM-based detectors for sampling elements in DHCAL: laboratory and beam evaluation

Abstract

We report on the results of an extensive R&D program aimed at the evaluation of Thick-Gas Electron Multipliers (THGEM) as potential active elements for Digital Hadron Calorimetry (DHCAL). Results are presented on efficiency, pad multiplicity and discharge probability of a 10x10 cm2 prototype detector with 1 cm2 readout pads. The detector is comprised of single- or double-THGEM multipliers coupled to the pad electrode either directly or via a resistive anode. Investigations employing standard discrete electronics and the KPiX readout system have been carried out both under laboratory conditions and with muons and pions at the CERN RD51 test beam. For detectors having a charge-induction gap, it has been shown that even a ~6 mm thick single-THGEM detector reached detection efficiencies above 95%, with pad-hit multiplicity of 1.1-1.2 per event; discharge probabilities were of the order of 1e-6 - 1e-5 sparks/trigger, depending on the detector structure and gain. Preliminary beam tests with a WELL hole-structure, closed by a resistive anode, yielded discharge probabilities of <2e-6 for an efficiency of ~95%. Methods are presented to reduce charge-spread and pad multiplicity with resistive anodes. The new method showed good prospects for further evaluation of very thin THGEM-based detectors as potential active elements for DHCAL, with competitive performances, simplicity and robustness. Further developments are in course.

15 pages, 11 figures, MPGD2011 conference proceeding

References in corpus (8)

• Particle Flow Calorimetry and the PandoraPFA Algorithm
• A concise review on THGEM detectors
• THGEM operation in Ne and Ne/CH4
• Towards THGEM UV-photon detectors for RICH: on single-photon detection efficiency in Ne/CH4 and Ne/CF4
• Further evaluation of a THGEM UV-photon detector for RICH - comparison with MWPC
• First Tests of Gaseous Detectors Made of a Resistive Mesh
• Recent results of Micromegas sDHCAL with a new readout chip
• Development of Large Area GEM Chambers

Cited by in corpus (18)

• The Resistive-WELL detector: a compact spark-protected single amplification-stage MPGD
• First studies with the Resistive-Plate WELL gaseous multiplier
• Beam Studies of the Segmented Resistive WELL: a Potential Thin Sampling Element for Digital Hadron Calorimetry
• Laboratory studies of THGEM-based WELL structures with resistive anodes
• Operation of a THGEM-based detector in low-pressure Helium
• Gain stabilization in Micro Pattern Gaseous Detectors: methodology and results
• THGEM gain calculations using Garfield++: Solving discrepancies between the simulation and experimental data
• Recent advances with THGEM detectors
• First in-beam studies of a Resistive-Plate WELL gaseous multiplier
• Development of a new generation of micropattern gaseous detectors for high energy physics, astrophysics and environmental applications
• The Resistive-Plate WELL with Argon mixtures - a robust gaseous radiation detector
• The Thick Gas Electron Multiplier and its derivatives: physics, technologies and applications
• Electrical breakdown in Thick-GEM based WELL detectors
• In-beam evaluation of a medium-size Resistive-Plate WELL gaseous particle detector
• First results of Resistive-Plate Well (RPWELL) detector operation at 163 K
• A concept for laboratory studies of radiation detectors over a broad dynamic-range: instabilities evaluation in THGEM-structures
• Evolution and Recent Developments of the Gaseous Photon Detectors Technologies
• Discharge mitigation methods in MPGD-based detectors