10.9k citations
Counting papers with at most 25 authors, so collaboration author lists do not stand in for the people here.
- The University of TokyoJP1.2k papers
- Kyoto UniversityJP1.1k papers
- Nagoya UniversityJP1.1k papers
- Tokyo Institute of TechnologyJP1k papers
- The University of OsakaJP1k papers
- The University of MelbourneAU1k papers
- The University of SydneyAU1k papers
- University of Science and Technology of ChinaCN1k papers
- Waseda UniversityJP1k papers
- University of LjubljanaSI1k papers
- High Energy Accelerator Research OrganizationJP1k papers
- Chinese Academy of SciencesCN982 papers
32 papers · 1 filter
Study of Particle Fluence Effects on Collected Charge and Depletion Voltage of the ATLAS IBL Planar Pixel Sensors
ATLAS Collaboration
After ten years of operation at the LHC, the planar pixel sensors of the innermost barrel layer of the ATLAS Pixel detector have accumulated an average bulk damage fluence in exces…
Improving topological cluster reconstruction using calorimeter cell timing in ATLAS
ATLAS Collaboration
Clusters of topologically connected calorimeter cells around cells with large absolute signal-to-noise ratio (topo-clusters) are the basis for calorimeter signal reconstruction in…
Statistical investigation of the large-area Si(Li) detectors mass-produced for the GAPS experiment
M. Kozai, K. Tokunaga, H. Fuke +13
The lithium-drifted silicon (Si(Li)) detector developed for the General Antiparticle Spectrometer (GAPS) experiment features a thick (~2.2 mm) sensitive layer, large (10 cm) diamet…
Operation and performance of the ATLAS semiconductor tracker in LHC Run 2
ATLAS Collaboration
The semiconductor tracker (SCT) is one of the tracking systems for charged particles in the ATLAS detector. It consists of 4088 silicon strip sensor modules. During Run 2 (20152…
Performance of the ATLAS RPC detector and Level-1 muon barrel trigger at TeV
ATLAS Collaboration
The ATLAS experiment at the Large Hadron Collider (LHC) employs a trigger system consisting of a first-level hardware trigger (L1) and a software-based high-level trigger. The L1 m…
Performance of the upgraded PreProcessor of the ATLAS Level-1 Calorimeter Trigger
ATLAS Collaboration
The PreProcessor of the ATLAS Level-1 Calorimeter Trigger prepares the analogue trigger signals sent from the ATLAS calorimeters by digitising, synchronising, and calibrating them…
Performance of the ATLAS muon triggers in Run 2
ATLAS Collaboration
The performance of the ATLAS muon trigger system is evaluated with proton-proton () and heavy-ion (HI) collision data collected in Run 2 during 2015-2018 at the Large Hadron Co…
ATLAS data quality operations and performance for 2015-2018 data-taking
ATLAS Collaboration
The ATLAS detector at the Large Hadron Collider reads out particle collision data from over 100 million electronic channels at a rate of approximately kHz, with a recording r…
Modelling radiation damage to pixel sensors in the ATLAS detector
ATLAS Collaboration
Silicon pixel detectors are at the core of the current and planned upgrade of the ATLAS experiment at the LHC. Given their close proximity to the interaction point, these detectors…
Electron reconstruction and identification in the ATLAS experiment using the 2015 and 2016 LHC proton-proton collision data at = 13 TeV
ATLAS Collaboration
Algorithms used for the reconstruction and identification of electrons in the central region of the ATLAS detector at the Large Hadron Collider (LHC) are presented in this paper; t…
Construction and Response of a Highly Granular Scintillator-based Electromagnetic Calorimeter
CALICE collaboration, J. Repond, L. Xia +78
A highly granular electromagnetic calorimeter with scintillator strip readout is being developed for future lepton collider experiments. A prototype of 21.5 depth and $180 \t…
Reconstruction of primary vertices at the ATLAS experiment in Run 1 proton-proton collisions at the LHC
ATLAS Collaboration
This paper presents the method and performance of primary vertex reconstruction in proton-proton collision data recorded by the ATLAS experiment during Run 1 of the LHC. The studie…
Resistive Plate Chamber Digitization in a Hadronic Shower Environment
Z. Deng, Y. Li, Y. Wang +125
The CALICE Semi-Digital Hadron Calorimeter (SDHCAL) technological prototype is a sampling calorimeter using Glass Resistive Plate Chamber detectors with a three-threshold readout a…
Optimization of layer composition for ILD ECAL
Hiroki Sumida, Masato Matama, Yuji Sudo +6
International Large Detector (ILD) adopts Particle Flow Algorithm (PFA) for precise measurement of multiple jets. The electromagnetic calorimeter (ECAL) of ILD has two candidates s…
Hadron shower decomposition in the highly granular CALICE analogue hadron calorimeter
The CALICE Collaboration, G. Eigen, T. Price +157
The spatial development of hadronic showers in the CALICE scintillator-steel analogue hadron calorimeter is studied using test beam data collected at CERN and FNAL for single posit…
DHCAL with Minimal Absorber: Measurements with Positrons
The CALICE Collaboration, B. Freund, C. Neubüser +99
In special tests, the active layers of the CALICE Digital Hadron Calorimeter prototype, the DHCAL, were exposed to low energy particle beams, without being interleaved by absorber…
Extraction Method of Fine Granular Performance from Scintillator Strip Electromagnetic Calorimeter
Katsushige Kotera, Daniel Jeans, Akiya Miyamoto +1
We describe an algorithm which has been developed to extract fine granularity information from an electromagnetic calorimeter with strip-based readout. Such a calorimeter, based on…
The Time Structure of Hadronic Showers in highly granular Calorimeters with Tungsten and Steel Absorbers
C. Adloff, J. -J. Blaising, M. Chefdeville +210
The intrinsic time structure of hadronic showers influences the timing capability and the required integration time of hadronic calorimeters in particle physics experiments, and de…
Performance of the first prototype of the CALICE scintillator strip electromagnetic calorimeter
CALICE Collaboration, K. Francis, J. Repond +191
A first prototype of a scintillator strip-based electromagnetic calorimeter was built, consisting of 26 layers of tungsten absorber plates interleaved with planes of 45x10x3 mm3 pl…
Shower development of particles with momenta from 1 to 10 GeV in the CALICE Scintillator-Tungsten HCAL
C. Adloff, J. -J. Blaising, M. Chefdeville +215
Lepton colliders are considered as options to complement and to extend the physics programme at the Large Hadron Collider. The Compact Linear Collider (CLIC) is an collide…
Validation of GEANT4 Monte Carlo Models with a Highly Granular Scintillator-Steel Hadron Calorimeter
C. Adloff, J. Blaha, J. -J. Blaising +169
Calorimeters with a high granularity are a fundamental requirement of the Particle Flow paradigm. This paper focuses on the prototype of a hadron calorimeter with analog readout, c…
Track segments in hadronic showers in a highly granular scintillator-steel hadron calorimeter
CALICE Collaboration, C. Adloff, J. -J. Blaising +205
We investigate the three dimensional substructure of hadronic showers in the CALICE scintillator-steel hadronic calorimeter. The high granularity of the detector is used to find tr…
Hadronic energy resolution of a highly granular scintillator-steel hadron calorimeter using software compensation techniques
CALICE Collaboration, C. Adloff, J. Blaha +163
The energy resolution of a highly granular 1 m3 analogue scintillator-steel hadronic calorimeter is studied using charged pions with energies from 10 GeV to 80 GeV at the CERN SPS.…
Construction and performance of a silicon photomultiplier/extruded scintillator tail-catcher and muon-tracker
The CALICE Collaboration
A prototype module for an International Linear Collider (ILC) detector was built, installed, and tested between 2006 and 2009 at CERN and Fermilab as part of the CALICE test beam p…