All-Optical Noise Quenching of An Integrated Frequency Comb
arXiv:2405.01238 · doi:10.1364/OPTICA.561954
Abstract
Integrated frequency combs promise transformation of lab-based metrology into disruptive real-world applications. These microcombs are, however, sensitive to stochastic thermal fluctuations of the integrated cavity refractive index, with its impact becoming more significant as the cavity size becomes smaller. This tradeoff between microcomb noise performance and footprint stands as a prominent obstacle to realizing applications beyond a controlled lab environment. Here, we demonstrate that small footprint and low noise become compatible through the all-optical Kerr-induced synchronization (KIS) method. Our study unveils that the phase-locking nature of the synchronization between the cavity soliton and the injected reference pump laser enables the microcomb to no longer be limited by internal noise sources. Instead, the microcomb noise is mostly limited by external sources, namely, the frequency noise of the two pumps that doubly pin the microcomb. First, we theoretically and experimentally show that the individual comb tooth linewidths of an octave-spanning microcomb remain within the same order-of-magnitude as the pump lasers, contrary to the single-pumped case that exhibits a more than two order-of-magnitude increase from the pump to the comb edge. Second, we theoretically show that intrinsic noise sources such as thermorefractive noise in KIS are quenched at the cavity decay rate, greatly decreasing its impact. Experimentally, we show that even with free-running lasers, the KIS microcomb can exhibit better repetition rate noise performance than the predicted thermorefractive noise limitation in absence of KIS.
References in corpus (36)
- Temporal solitons in optical microresonators
- Frequency comb spectroscopy
- An Integrated-Photonics Optical-Frequency Synthesizer
- Generation of Ultrastable Microwaves via Optical Frequency Division
- Massively parallel coherent laser ranging using soliton microcombs
- On-chip dual comb source for spectroscopy
- Human breath analysis via cavity-enhanced optical frequency comb spectroscopy
- Raman induced soliton self-frequency shift in microresonator Kerr frequency combs
- μW-Level Microresonator Solitons with Extended Stability Range Using an Auxiliary Laser
- Kerr-lens mode-locked lasers as transfer oscillators for optical frequency measurements
- Chasing the thermodynamical noise limit in whispering-gallery-mode resonators for ultrastable laser frequency stabilization
- Self-referencing of an on-chip soliton Kerr frequency comb without external broadening
- Thermo-refractive noise in silicon nitride microresonators
- Direct Frequency Comb Measurement of OD + CO -> DOCO Kinetics
- Stellar Spectroscopy in the Near-infrared with a Laser Frequency Comb
- Dual pumped microresonator frequency combs
- Solitons and frequency combs in silica microring resonators: Interplay of the Raman and higher-order dispersion effects
- 36 Hz integral linewidth laser based on a photonic integrated 4.0-meter coil resonator
- Mid-Infrared ultra-high-Q resonators based on fluoride crystalline materials
- Broadband Resonator-Waveguide Coupling for Efficient Extraction of Octave Spanning Microcombs
- Optical Lattice Trap for Kerr Solitons
- Ultra-Broadband Kerr Microcomb Through Soliton Spectral Translation
- Kerr-Induced Synchronization of a Cavity Soliton to an Optical Reference
- Optical linewidth of soliton microcombs
- A Kerr-microresonator optical clockwork
- Dissipative cnoidal waves (Turing rolls) and the soliton limit in microring resonators
- Quantum diffusion of microcavity solitons
- Dissipative Kerr solitons and Cherenkov radiation in optical microresonators with third order dispersion
- Kerr Microresonator Soliton Frequency Combs at Cryogenic Temperatures
- Sideband Injection Locking in Microresonator Frequency Combs
- Harnessing Dispersion in Soliton Microcombs to Mitigate Thermal Noise
- Fundamental thermal noise limits for optical microcavities
- Versatile Optical Frequency Division with Kerr-induced Synchronization at Tunable Microcomb Synthetic Dispersive Waves
- Self-injection-locked optical parametric oscillator based on microcombs
- Efficiently Modeling the Noise Performance of Short-Pulse Lasers with a Computational Implementation of Dynamical Methods
- AC-Josephson Effect and Sub-Comb Mode-Locking in a Kerr-Induced Synchronized Cavity Soliton