Kerr Microresonator Soliton Frequency Combs at Cryogenic Temperatures

Abstract

We present measurements of silicon nitride nonlinear microresonators and frequency comb generation at cryogenic temperatures as low as 7~K. The resulting two orders of magnitude reduction in the thermo-refractive coefficient relative to room-temperature enables direct access to single bright Kerr soliton states through adiabatic frequency tuning of the pump laser while remaining in thermal equilibrium. Our experimental results, supported by theoretical modeling, show that single solitons are easily accessible at temperatures below 60~K for the microresonator device under study. We further demonstrate that the cryogenic temperature primarily impacts the thermo-refractive coefficient. Other parameters critical to the generation of solitons, such as quality factor, dispersion, and effective nonlinearity, are unaltered. Finally, we discuss the potential improvement in thermo-refractive noise resulting from cryogenic operation. The results of this study open up new directions in advancing chip-scale frequency comb optical clocks and metrology at cryogenic temperatures.

References in corpus (15)

• Temporal solitons in optical microresonators
• An Integrated-Photonics Optical-Frequency Synthesizer
• Generation of Ultrastable Microwaves via Optical Frequency Division
• Breaking the Loss Limitation of On-chip High-confinement Resonators
• Stability Analysis of the Lugiato-Lefever Model for Kerr Optical Frequency Combs. Part I: Case of Normal Dispersion
• Thermally Controlled Comb Generation and Soliton Modelocking in Microresonators
• Stably accessing octave-spanning microresonator frequency combs in the soliton regime
• Octave-spanning dissipative Kerr soliton frequency combs in $S{i}_3{N}_4$ microresonators
• μW-Level Microresonator Solitons with Extended Stability Range Using an Auxiliary Laser
• Ultralow-power chip-based soliton microcombs for photonic integration
• Thermo-refractive noise in silicon nitride microresonators
• Bringing short-lived dissipative Kerr soliton states in microresonators into a steady state
• A Kerr-microresonator optical clockwork
• pyLLE: a Fast and User Friendly Lugiato-Lefever Equation Solver
• A medium-finesse optical cavity for the stabilization of Rydberg lasers

Cited by in corpus (19)

• Ultra-efficient frequency comb generation in AlGaAs-on-insulator microresonators
• Applications of integrated optical microcombs
• Monolithic piezoelectric control of soliton microcombs
• Quantum optics of soliton microcombs
• Recent Advances in Laser Self-Injection Locking to High-$Q$ Microresonators
• Hybrid Integrated Photonics Using Bulk Acoustic Resonators
• Dissipative Kerr Solitons in a III-V Microresonator
• Optical linewidth of soliton microcombs
• Piezoelectric actuation for integrated photonics
• Thermally Induced Generation of Platicons in Optical Microresonators
• Thermal noise reduction in soliton microcombs via laser self-cooling
• Fundamental thermal noise limits for optical microcavities
• Dual-polarization RF Channelizer Based on Kerr Soliton Microcomb Sources
• Integrated Buried Heaters for Efficient Spectral Control of Air-Clad Microresonator Frequency Combs
• Thermal instabilities, frequency comb formation, and temporal oscillations in Kerr microresonators
• All-Optical Noise Quenching of An Integrated Frequency Comb
• Photon-photon polaritons in chi(2) microresonators
• Platicon Stability in Hot Cavities
• Tailoring Broadband Kerr Soliton Microcombs via Post-Fabrication Tuning of the Geometric Dispersion