Broadband polarization insensitivity and high detection efficiency in high-fill-factor superconducting microwire single-photon detectors
arXiv:2202.05942 · doi:10.1063/5.0088007
Abstract
Single-photon detection via absorption in current-biased nanoscale superconducting structures has become a preferred technology in quantum optics and related fields. Single-mode fiber packaged devices have seen new records set in detection efficiency, timing jitter, recovery times, and largest sustainable count rates. The popular approaches to decreasing polarization sensitivity have thus far been limited to introduction of geometrically symmetric nanowire meanders, such as spirals and fractals, in the active area. The constraints on bending radii, and by extension, fill factors, in such designs limits their maximum efficiency. The discovery of single-photon sensitivity in micrometer-scale superconducting wires enables novel meander patterns with no effective upper limit on fill factor. This work demonstrates simultaneous low-polarization sensitivity () and high detection efficiency ( with confidence at counts per second) across a nm bandwidth centered at 1550 nm in 0.51 wide microwire devices made of silicon-rich tungsten silicide, with a fill factor in the active area. These devices boasted efficiencies of at counts per second for 1550 nm light.
18 pages, 13 figures (including supplementary document) Added citations in replacement version
References in corpus (6)
- Sending-or-Not-Sending with Independent Lasers: Secure Twin-Field Quantum Key Distribution Over 509 km
- On-Chip Detection of Entangled Photons by Scalable Integration of Single-Photon Detectors
- Optical Properties of Superconducting Nanowire Single-Photon Detectors
- Quantum key distribution over a 72 dB channel loss using ultralow dark count superconducting single-photon detectors
- Different single photon response of wide and narrow superconducting MoSi strips
- Design of polarization-insensitive superconducting single photon detectors with high-index dielectrics