paper

Superconducting microstrip single-photon detector with system detection efficiency over 90% at 1550 nm

arXiv:2101.05407 · doi:10.1364/PRJ.419514

Abstract

Generally, a superconducting nanowire single-photon detector (SNSPD) is composed of wires with a typical width of ~100 nm. Recent studies have found that superconducting strips with a micrometer-scale width can also detect single photons. Compared with the SNSPD, the superconducting microstrip single-photon detector (SMSPD) has smaller kinetic inductance, higher working current, and lower requirement in fabrication accuracy, providing potential applications in the development of ultra-large active area detectors. However, the study on SMSPD is still in its infancy, and the realization of its high-performance and practical use remains an opening question. This study demonstrates a NbN SMSPD with a saturated system detection efficiency (SDE) of ~92.2% at a dark count rate of ~200 cps, a polarization sensitivity of ~1.03, and a minimum timing jitter of ~48 ps, at the telecom wavelength of 1550 nm when coupled with a single mode fiber and operated at 0.84 K. Furthermore, the detector's SDE is over 70% when operated at a 2.1-K closed-cycle cryocooler.

arXiv comment10 pages,7 figures, 2 tables

References in corpus (30)

Cited by in corpus (15)