Simulation of the Hall-Petch effect in FCC polycrystals by means of strain gradient crystal plasticity and FFT homogenization

Abstract

The influence of grain size on the flow stress of various FCC polycrystals (Cu, Al, Ag and Ni) has been analyzed by means of computational homogenization of a representative volume element of the microstructure using a FFT approach in combination with a strain gradient crystal plasticity model. The density of geometrically necessary dislocations resulting from the incompatibility of plastic deformation among different crystals was obtained from the Nye tensor, which was efficiently obtained from the curl operation in the Fourier space. The simulation results were in good agreement with the experimental data for Cu, Al, Ag and Ni polycrystals for grain sizes > 20 microns and strains < 5% and provided a physical explanation for the higher strengthening provided by grain boundaries in Al and Ni, as compared with Cu and Ag. The investigation demonstrates how the combination of FFT with strain gradient crystal plasticity can be used to include effect of grain boundaries in the mechanical behavior of polycrystals using realistic representative volume elements of the microstructure.

References in corpus (12)

• A numerical method for computing the overall response of nonlinear composites with complex microstructure
• Fourier-based schemes for computing the mechanical response of composites with accurate local fields
• The Hall-Petch effect as a manifestation of the general size effect
• An FFT-based Galerkin Method for Homogenization of Periodic Media
• Computational Homogenization of Polycrystals
• Finite strain FFT-based non-linear solvers made simple
• A finite element perspective on non-linear FFT-based micromechanical simulations
• An analysis of the influence of grain size on the strength of FCC polycrystals by means of computational homogenization
• Scaling Properties of Dislocation Simulations in the Similitude Regime
• On the accuracy of spectral solvers for micromechanics based fatigue modeling
• Grain boundary strengthening of FCC polycrystals
• An algorithm for stress and mixed control in Galerkin based FFT homogenization

Cited by in corpus (4)

• A coupled model of diffusional creep of polycrystalline solids based on climb of dislocations at grain boundaries
• A Statistical Perspective for Predicting the Strength of Metals: Revisiting the Hall-Petch Relationship using Machine Learning
• Grain-size dependence of plastic-brittle transgranular fracture
• On the effect of slip transfer at grain boundaries on the strength of FCC polycrystals