An analysis of the influence of grain size on the strength of FCC polycrystals by means of computational homogenization

Abstract

The effect of grain size on the flow stress of FCC polycrystals is analyzed by means of a multiscale strategy based on computational homogenization of the polycrystal aggregate. The mechanical behavior of each crystal is given by a dislocation-based crystal plasticity model in which the critical resolved shear stress follows the Taylor model. The generation and annihilation of dislocations in each slip system during deformation is given by the Kocks-Mecking model, which was modified to account for the dislocation storage at the grain boundaries. Polycrystalline Cu is selected to validate the simulation strategy and all the model parameters are obtained from dislocation dynamics simulations or experiments at lower length scales and the simulation results were in good agreement with experimental data in the literature. The model is applied to explore the influence of different microstructural factors (initial dislocation density, width of the grain size distribution, texture) on the grain size effect. It is found that the initial dislocation density, ${\rho }_i$, plays a dominant role in the magnitude of the grain size effect and that dependence of flow stress with an inverse power of grain size (${\sigma }_y-{\sigma }_{\infty }\propto d_g^{-x}$) breaks down for large initial dislocation densities ($>10^{14}$ m${}^{-2}$) and grain sizes $d_g>$ 40 $\mu$m in FCC metals. However, it was found that the grain size contribution to the strength followed a power-law function of the dimensionless parameter $d_g\sqrt{{\rho }_i}$ for small values of the applied strain ($<$ 2 \%), in agreement with previous theoretical considerations for size effects in plasticity.

References in corpus (2)

• The Hall-Petch effect as a manifestation of the general size effect
• Scaling Properties of Dislocation Simulations in the Similitude Regime

Cited by in corpus (15)

• Computational Homogenization of Polycrystals
• Effects of the grain size and shape on the flow stress: A dislocation dynamics study
• Crystal plasticity simulation of the effect of grain size on the fatigue behavior of polycrystalline Inconel 718
• Simulation of the Hall-Petch effect in FCC polycrystals by means of strain gradient crystal plasticity and FFT homogenization
• An atomistic investigation of the interaction of dislocations with Guinier-Preston zones in Al-Cu alloys
• Characterisation of slip and twin activity using digital image correlation and crystal plasticity finite element simulation: Application to orthorhombic $\alpha$-uranium
• Grain boundary strengthening of FCC polycrystals
• A coupled model of diffusional creep of polycrystalline solids based on climb of dislocations at grain boundaries
• A Statistical Perspective for Predicting the Strength of Metals: Revisiting the Hall-Petch Relationship using Machine Learning
• Thermodynamic considerations on a class of dislocation-based constitutive models
• Grain-size dependence of plastic-brittle transgranular fracture
• Effect of slip transmission at grain boundaries in Al bicrystals
• On the effect of slip transfer at grain boundaries on the strength of FCC polycrystals
• An analysis of the influence of the precipitate type on the mechanical behavior of Al-Cu alloys by means of micropillar compression tests
• An analysis of (the lack of) slip transfer between near-cube oriented grains in pure Al