110 citations · 212 across the 5 of their papers we have counts for
5 papers
On the effect of slip transfer at grain boundaries on the strength of FCC polycrystals
E. Nieto-Valeiras, S. Haouala, J. LLorca
The effect of slip transfer on the flow strength of various FCC polycrystals was analyzed by means of computational homogenization of a representative volume element of the microst…
An analysis of the influence of the precipitate type on the mechanical behavior of Al-Cu alloys by means of micropillar compression tests
B. Bellón, S. Haouala, J. LLorca
The influence of different types of precipitates (either Guinier-Preston zones, or ) on the critical resolved shear stress and strain hardening was determined by means of…
Simulation of the Hall-Petch effect in FCC polycrystals by means of strain gradient crystal plasticity and FFT homogenization
S. Haouala, S. Lucarini, J. LLorca +1
The influence of grain size on the flow stress of various FCC polycrystals (Cu, Al, Ag and Ni) has been analyzed by means of computational homogenization of a representative volume…
Effect of slip transmission at grain boundaries in Al bicrystals
S. Haouala, R. Alizadeh, T. R. Bieler +2
The effect of slip transfer on the deformation mechanisms of Al bicrystals was explored using a rate-dependent dislocation-based crystal plasticity model. Three different types of…
An analysis of the influence of grain size on the strength of FCC polycrystals by means of computational homogenization
S. Haouala, J. Segurado, J. LLorca
The effect of grain size on the flow stress of FCC polycrystals is analyzed by means of a multiscale strategy based on computational homogenization of the polycrystal aggregate. Th…