Chasing the thermodynamical noise limit in whispering-gallery-mode resonators for ultrastable laser frequency stabilization
arXiv:1701.05285 · doi:10.1038/s41467-017-00021-9
Abstract
Ultrastable high-spectral-purity lasers have served as the cornerstone behind optical atomic clocks, quantum measurements, precision optical-microwave generation, high resolution optical spectroscopy and sensing. Hertz-level lasers stabilized to high finesse Fabry-Pérot mirror cavities are typically used for these studies but are large and fragile such that they have remained laboratory instruments. There is a clear demand in rugged miniaturized lasers operating potentially at comparable stabilities to those bulk lasers. Over the past decade, ultrahigh-Q optical whispering-gallery-mode (WGM) resonators have served as a platform for low-noise microlasers but have not yet reached the ultimate stabilities defined by their fundamental noise. Here, we show the noise characteristics of WGM resonators and demonstrate a resonator-stabilized laser at the fundamental limit by compensating the intrinsic thermal expansion of a WGM resonator, allowing a sub-25 Hz linewidth and a 32 Hz Allan deviation on the 191 THz carrier in 100 ms integration. We also reveal the environmental sensitivities of the resonator at the thermodynamical noise limit and long-term frequency drifts governed by random-walk-noise statistics.
References in corpus (9)
- LIGO: The Laser Interferometer Gravitational-Wave Observatory
- Generation of Ultrastable Microwaves via Optical Frequency Division
- A sub-40 mHz linewidth laser based on a silicon single-crystal optical cavity
- Improved Measurement of the Hydrogen 1S - 2S Transition Frequency
- Sub-Hz line width diode lasers by stabilization to vibrationally and thermally compensated ULE Fabry-Perot cavities
- Comparison of Two Independent Sr Optical Clocks with 1e-17 Stability at 10^3 s
- Fundamental thermal fluctuations in microspheres
- Frequency-stabilization to 6x10^-16 via spectral-hole burning
- Temperature measurement and stabilization in a birefringent whispering gallery resonator
Cited by in corpus (20)
- Hertz-linewidth semiconductor lasers using CMOS-ready ultra-high- microresonators
- Probing 10 μK stability and residual drifts in the cross-polarized dual-mode stabilization of single-crystal ultrahigh-Q optical resonators
- Thermo-refractive noise in silicon nitride microresonators
- Recent Advances in Laser Self-Injection Locking to High- Microresonators
- 36 Hz integral linewidth laser based on a photonic integrated 4.0-meter coil resonator
- Nanometric precision distance metrology via chip-scale soliton microcombs
- Spectral purification of microwave signals with disciplined dissipative Kerr solitons
- Versatile tuning of Kerr soliton microcombs in crystalline microresonators
- Thermally Induced Generation of Platicons in Optical Microresonators
- Fundamental thermal noise limits for optical microcavities
- Ultraprecise optical-frequency stabilization with heterogeneous III-V/Si lasers
- A microrod optical-frequency reference in the ambient environment
- Optical microcombs in whispering gallery mode crystalline resonators with dispersive intermode interactions
- All-Optical Noise Quenching of An Integrated Frequency Comb
- Overcoming Thermo-Optical Dynamics in Broadband Nanophotonic Sensing
- Using thermo-optical nonlinearity to robustly separate absorption and radiation losses in nanophotonic resonators
- Laser stabilization to a cryogenic fiber ring resonator
- Platicon Stability in Hot Cavities
- Temperature-independent optical cavities for laser frequency stabilization
- Systematic dispersion engineering of crystalline microresonators for broadband and coherent frequency comb generation