Thermal Noise Reduction and Absorption Optimisation via Multi-Material Coatings

Abstract

Future gravitational wave detectors (GWDs) such as Advanced LIGO upgrades and the Einstein Telescope are planned to operate at cryogenic temperatures using crystalline silicon (cSi) test-mass mirrors at an operation wavelength of 1550 nm. The reduction in temperature in principle provides a direct reduction in coating thermal noise, but the presently used coating stacks which are composed of silica (SiO2) and tantala (Ta2O5) show cryogenic loss peaks which results in less thermal noise improvement than might be expected. Due to low mechanical loss at low temperature amorphous silicon (aSi) is a very promising candidate material for dielectric mirror coatings and could replace Ta2O5. Unfortunately, such a aSi/SiO2 coating is not suitable for use in GWDs due to high optical absorption in aSi coatings. We explore the use of a three material based coating stack. In this multi-material design the low absorbing Ta2O5 in the outermost coating layers significantly reduces the incident light power, while aSi is used only in the lower bilayers to maintain low optical absorption. Such a coating design would enable a reduction of Brownian thermal noise by 25%. We show experimentally that an optical absorption of only (5.3 +/- 0.4)ppm at 1550 nm should be achievable.

References in corpus (2)

• Multi-Material Coatings with Reduced Thermal Noise
• Optical Absorption Measurement at 1550 nm on a Highly-Reflective Si/SiO${}_2$ Coating Stack

Cited by in corpus (12)

• Multi-Material Coatings with Reduced Thermal Noise
• Progress in the measurement and reduction of thermal noise in optical coatings for gravitational-wave detectors
• Coherent Cancellation of Photothermal Noise in GaAs/Al${}_{0.92}$Ga${}_{0.08}$As Bragg Mirrors
• ETpathfinder: a cryogenic testbed for interferometric gravitational-wave detectors
• Technology for the next gravitational wave detectors
• Ternary Quarter Wavelength Coatings for Gravitational Wave Detector Mirrors: Design Optimization via Exhaustive Search
• Development of ion-beam sputtered silicon nitride thin films for low-noise mirror coatings of gravitational-wave detectors
• Thermorefringent noise in crystalline optical materials
• Strategies to reduce the thermoelastic loss of multimaterial coated finite substrates
• Optimal Design of Coatings for Mirrors of Gravitational Wave Detectors: Analytic Turbo Solution via Herpin Equivalent Layers
• Thermal Noise Reduction in Ternary Optical Coatings: From Ti::GeO${}_2$-Based Ternary Systems to High Index Materials
• Thermal noise in complex systems