Highly textured oxypnictide superconducting thin films on metal substrates
arXiv:1410.8743 · doi:10.1063/1.4900931
Abstract
Highly textured NdFeAs(O,F) thin films have been grown on ion beam assisted deposition (IBAD)-MgO/Y2O3/Hastelloy substrates by molecular beam epitaxy. The oxypnictide coated conductors showed a superconducting transition temperature (Tc) of 43 K with a self-field critical current density (Jc) of 7.0 x 104 A/cm2 at 5 K, more than 20 times higher than powder-in-tube processed SmFeAs(O,F) wires. Albeit higher Tc as well as better crystalline quality than Co-doped BaFe2As2 coated conductors, in-field Jc of NdFeAs(O,F) was lower than that of Co-doped BaFe2As2. These results suggest that grain boundaries in oxypnictides reduce Jc significantly compared to that in Co-doped BaFe2As2 and, hence biaxial texture is necessary for high Jc.
arXiv comment4 pages, 4 figures
References in corpus (12)
- Phase Diagram and High Temperature Superconductivity at 65 K in Tuning Carrier Concentration of Single-Layer FeSe Films
- New Fe-based superconductors: properties relevant for applications
- Advantageous grain boundaries in iron pnictide superconductors
- High intergrain critical current density in fine-grain (Ba0.6K0.4)Fe2As2 wires and bulks
- Biaxially textured cobalt-doped BaFe2As2 films with high critical current density over 1 MA/cm2 on MgO-buffered metal-tape flexible substrates
- Epitaxial growth of FeSeTe thin films on CaF substrates with high critical current density
- Epitaxial Growth of Superconducting Ba(Fe1-xCox)2As2 Thin Films on Technical IBAD-MgO Substrates
- Effective Ex-Situ Fabrication of F-Doped SmFeAsO Wire for High Transport Critical Current Density
- Versatile fluoride substrates for Fe-based superconducting thin films
- Oxypnictide SmFeAs(O,F) superconductor: a candidate for high-field magnet applications
- The influence of the buffer layer architecture on transport properties for BaFe1.8Co0.2As2 films on technical substrates
- BaFe2As2/Fe bilayers with [001]-tilt grain boundary on MgO and SrTiO3 bicrystal substrates
Cited by in corpus (9)
- Recent advances in iron-based superconductors toward applications
- Fe-based superconducting thin films on metallic substrates: growth, characteristics and relevant properties
- Grain boundary characteristics of Fe-based superconductors
- Enhanced critical-current in P-doped BaFe2As2 thin films on metal substrates arising from poorly aligned grain boundaries
- BaFe2(As1-xPx)2 (x = 0.22-0.42) thin films grown on practical metal-tape substrates and their critical current densities
- Nanoscale Texture and Microstructure in NdFeAs(O,F)/IBAD-MgO Superconducting Thin Film with Superior Critical Current Properties
- Particulate Generation on Surface of Iron Selenide Films by Air Exposure
- Fabrication of grain boundary junctions using NdFeAs(O,F) superconducting thin films
- Grain boundary characteristics of oxypnictide NdFeAs(O,F) superconductors