Simulations and measurements of beam loss patterns at the CERN Large Hadron Collider
arXiv:1409.3123 · doi:10.1103/PhysRevSTAB.17.081004
Abstract
The CERN Large Hadron Collider (LHC) is designed to collide proton beams of unprecedented energy, in order to extend the frontiers of high-energy particle physics. During the first very successful running period in 2010--2013, the LHC was routinely storing protons at 3.5--4 TeV with a total beam energy of up to 146 MJ, and even higher stored energies are foreseen in the future. This puts extraordinary demands on the control of beam losses. An un-controlled loss of even a tiny fraction of the beam could cause a superconducting magnet to undergo a transition into a normal-conducting state, or in the worst case cause material damage. Hence a multi-stage collimation system has been installed in order to safely intercept high-amplitude beam protons before they are lost elsewhere. To guarantee adequate protection from the collimators, a detailed theoretical understanding is needed. This article presents results of numerical simulations of the distribution of beam losses around the LHC that have leaked out of the collimation system. The studies include tracking of protons through the fields of more than 5000 magnets in the 27 km LHC ring over hundreds of revolutions, and Monte-Carlo simulations of particle-matter interactions both in collimators and machine elements being hit by escaping particles. The simulation results agree typically within a factor 2 with measurements of beam loss distributions from the previous LHC run. Considering the complex simulation, which must account for a very large number of unknown imperfections, and in view of the total losses around the ring spanning over 7 orders of magnitude, we consider this an excellent agreement. Our results give confidence in the simulation tools, which are used also for the design of future accelerators.
Cited by in corpus (7)
- Performance and luminosity models for heavy-ion operation at the CERN Large Hadron Collider
- Testing Beam-Induced Quench Levels of LHC Superconducting Magnets
- Beam-induced backgrounds measured in the ATLAS detector during local gas injection into the LHC beam vacuum
- Charting the Luminosity Capabilities of the CERN Large Hadron Collider with Various Nuclear Species
- Fast Failures in the LHC and the future High Luminosity LHC*
- Beam Measurements and Machine Learning at the CERN Large Hadron Collider
- A Collimation System Baseline Design for the Electron Storage Ring at the Electron-Ion Collider