Beam-induced backgrounds measured in the ATLAS detector during local gas injection into the LHC beam vacuum
arXiv:2405.05054 · doi:10.1088/1748-0221/19/06/P06014
Abstract
Inelastic beam-gas collisions at the Large Hadron Collider (LHC), within a few hundred metres of the ATLAS experiment, are known to give the dominant contribution to beam backgrounds. These are monitored by ATLAS with a dedicated Beam Conditions Monitor (BCM) and with the rate of fake jets in the calorimeters. These two methods are complementary since the BCM probes backgrounds just around the beam pipe while fake jets are observed at radii of up to several metres. In order to quantify the correlation between the residual gas density in the LHC beam vacuum and the experimental backgrounds recorded by ATLAS, several dedicated tests were performed during LHC Run 2. Local pressure bumps, with a gas density several orders of magnitude higher than during normal operation, were introduced at different locations. The changes of beam-related backgrounds, seen in ATLAS, are correlated with the local pressure variation. In addition the rates of beam-gas events are estimated from the pressure measurements and pressure bump profiles obtained from calculations. Using these rates, the efficiency of the ATLAS beam background monitors to detect beam-gas events is derived as a function of distance from the interaction point. These efficiencies and characteristic distributions of fake jets from the beam backgrounds are found to be in good agreement with results of beam-gas simulations performed with the FLUKA Monte Carlo programme.
arXiv comment61 pages in total, author list starting page 44, 13 figures, 9 tables, JINST 19 (2024) P06014. All figures including auxiliary figures are available at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/DAPR-2021-02
References in corpus (13)
- The anti-k_t jet clustering algorithm
- FastJet user manual
- Performance of the ATLAS Trigger System in 2015
- Topological cell clustering in the ATLAS calorimeters and its performance in LHC Run 1
- Characterisation and mitigation of beam-induced backgrounds observed in the ATLAS detector during the 2011 proton-proton run
- Simulations and measurements of beam loss patterns at the CERN Large Hadron Collider
- The ATLAS Experiment at the CERN Large Hadron Collider: A Description of the Detector Configuration for Run 3
- The performance of the jet trigger for the ATLAS detector during 2011 data taking
- Monitoring and data quality assessment of the ATLAS liquid argon calorimeter
- Beam-induced and cosmic-ray backgrounds observed in the ATLAS detector during the LHC 2012 proton-proton running period
- Search for neutral long-lived particles in collisions at TeV that decay into displaced hadronic jets in the ATLAS calorimeter
- Search for light long-lived neutral particles that decay to collimated pairs of leptons or light hadrons in collisions at TeV with the ATLAS detector
- Comparison between simulated and observed LHC beam backgrounds in the ATLAS experiment at = 4 TeV