Novel Calibration Method for Switched Capacitor Arrays Enables Time Measurements with Sub-Picosecond Resolution

Abstract

Switched capacitor arrays (SCA) ASICs are becoming more and more popular for the readout of detector signals, since the sampling frequency of typically several gigasamples per second allows excellent pile-up rejection and time measurements. They suffer however from the fact that their sampling bins are not equidistant in time, given by limitations of the chip process. In the past, this limited time measurements of optimal signals to standard deviations (σ) of about 4-25 ps in accuracy for the split pulse test, depending on the specific chip. This paper introduces a novel time calibration, which determines the true sampling speed of an SCA. Additionally, for two independently running SCA chips, the achieved time resolution improved to less than 3 ps (σ) independently from the delay for the split pulse test, when simply applying a linear interpolation. When using a more advanced analyzing technique for the split pulse test with a single SCA, this limit is pushed below 1 ps (σ) for delays up to 8 ns. Various test measurements with different boards based on the DRS4 ASIC indicate that the new calibration is stable over time but not over larger temperature variations.

arXiv comment12 pages, 17 figures

References in corpus (5)

• The Large Analog Bandwidth Recorder And Digitizer with Ordered Readout (LABRADOR) ASIC
• A 15 GSa/s, 1.5 GHz Bandwidth Waveform Digitizing ASIC
• Performance of the front-end electronics of the ANTARES neutrino telescope
• Analysis techniques and performance of the Domino Ring Sampler version 4 based readout for the MAGIC telescopes
• A direct time measurements technique for the two-dimensional precision coordinate detectors based on thin-walled drift tubes

Cited by in corpus (9)

• Measurements of timing resolution of ultra-fast silicon detectors with the SAMPIC waveform digitizer
• PID Techniques: Alternatives to RICH Methods
• TARGET 5: a new multi-channel digitizer with triggering capabilities for gamma-ray atmospheric Cherenkov telescopes
• Performance of a spaghetti calorimeter prototype with tungsten absorber and garnet crystal fibres
• Time resolution of time-of-flight detector based on multiple scintillation counters readout by SiPMs
• The design and performance of a prototype water Cherenkov optical time-projection chamber
• An overdetermined linear equations-based time calibration method for fast sampling ASICs
• CTC and CT5TEA: an advanced multi-channel digitizer and trigger ASIC for imaging atmospheric Cherenkov telescopes
• A Time-to-Digital Converter-based Correction Method for Charge Measurement through Area Integration