MAKO: a pathfinder instrument for on-sky demonstration of low-cost 350 micron imaging arrays
arXiv:1211.0315 · doi:10.1117/12.926223
Abstract
Submillimeter cameras now have up to pixels (SCUBA 2). The proposed CCAT 25-meter submillimeter telescope will feature a 1 degree field-of-view. Populating the focal plane at 350 microns would require more than photon-noise limited pixels. To ultimately achieve this scaling, simple detectors and high-density multiplexing are essential. We are addressing this long-term challenge through the development of frequency-multiplexed superconducting microresonator detector arrays. These arrays use lumped-element, direct-absorption resonators patterned from titanium nitride films. We will discuss our progress toward constructing a scalable 350 micron pathfinder instrument focusing on fabrication simplicity, multiplexing density, and ultimately a low per-pixel cost.
arXiv comment10 pages, 3 figures
References in corpus (8)
- Titanium Nitride Films for Ultrasensitive Microresonator Detectors
- A dual-band millimeter-wave kinetic inductance camera for the IRAM 30-meter telescope
- A readout for large arrays of Microwave Kinetic Inductance Detectors
- Operation of a titanium nitride superconducting microresonator detector in the nonlinear regime
- High-speed phonon imaging using frequency-multiplexed kinetic inductance detectors
- Two-level system noise reduction for Microwave Kinetic Inductance Detectors
- Electronics and data acquisition demonstrator for a kinetic inductance camera
- ARCONS: A highly multiplexed superconducting optical to near-IR camera
Cited by in corpus (11)
- Review: Far-Infrared Instrumentation and Technology Development for the Next Decade
- Photon-noise limited sensitivity in titanium nitride kinetic inductance detectors
- Horn-Coupled, Commercially-Fabricated Aluminum Lumped-Element Kinetic Inductance Detectors for Millimeter Wavelengths
- Applications for Microwave Kinetic Induction Detectors in Advanced Instrumentation
- Design and performance of dual-polarization lumped-element kinetic inductance detectors for millimeter-wave polarimetry
- Analysis and calibration techniques for superconducting resonators
- A frequency and sensitivity tunable microresonator array for high-speed quantum processor readout
- A LEKID-based CMB instrument design for large-scale observations in Greenland
- Fabrication of antenna-coupled KID array for Cosmic Microwave Background detection
- A kinetic inductance detectors array design for high background conditions at 150 GHz
- The Galaxy Evolution Probe