Advances in the Development of Micropattern Gaseous Detectors with Resistive Electrodes
arXiv:1005.1477 · doi:10.1016/j.nima.2010.09.171
Abstract
We describe the most recent efforts made by various groups in implementing resistive electrodes in micropattern gaseous detectors with the aim to combine in the same design the best features of RPCs (for the example, their robustness and spark protection property) with the high granularity and thus the good position resolution offered by microelectronic technology. In the stream of this activity, we have recently developed two novel detectors with resistive electrodes: one was based on resistive micromeshes and the second one is a MSGC with resistive electrodes. We have demonstrated that the resistive meshes are a convenient construction element for various designs of spark protective detectors: RPCs type, GEM type and MICROMEGAS type. These new detectors enable to considerably enhance the RPC and micropattern detectors applications since they feature not only a high position resolution but also a relatively good energy resolution (25-30 persent FWHM at 6 keV) and, if necessary, they can operate in cascaded mode allowing the achievement of a high overall gas gain. The main conclusion from these studies is that the implementation of resistive electrodes in micropattern detectors makes them fully spark protected; on this basis we consider this direction very promising.
References in corpus (9)
- Detection of the primary scintillation light from dense Ar, Kr and Xe with novel photosensitive gaseous detectors
- Thick GEM versus thin GEM in two-phase argon avalanche detectors
- Development of innovative micropattern gaseous detectors with resistive electrodes and first results of their applications
- A Novel UV Photon Detector with Resistive Electrodes
- Research on discharges in micropattern and small gap gaseous detectors
- Developments and the preliminary tests of Resistive GEMs manufactured by a screen printing technology
- First Tests of Gaseous Detectors Made of a Resistive Mesh
- Progress in Developing Hybrid RPCs: GEM-like Detectors with Resistive Electrodes
- Advances in Micro-Pattern Gaseous Detectors and their Applications
Cited by in corpus (14)
- The Resistive-WELL detector: a compact spark-protected single amplification-stage MPGD
- The micro-RWELL layouts for high particle rate
- First studies with the Resistive-Plate WELL gaseous multiplier
- Laboratory studies of THGEM-based WELL structures with resistive anodes
- Development of a new generation of micropattern gaseous detectors for high energy physics, astrophysics and environmental applications
- On the space resolution of the -RWELL
- The Thick Gas Electron Multiplier and its derivatives: physics, technologies and applications
- A novel fast timing micropattern gaseous detector: FTM
- Electrical breakdown in Thick-GEM based WELL detectors
- First results of Resistive-Plate Well (RPWELL) detector operation at 163 K
- Development and preliminary tests of resistive microdot and microstrip detectors
- An improved design of spark-protected microstrip gas counters (R-MSGC)
- First tests of "bulk" MICROMEGAS with resistive cathode mesh
- New designs of resistive microstrip gaseous detectors (R-MSGCs)