Developments and the preliminary tests of Resistive GEMs manufactured by a screen printing technology
arXiv:0708.2344 · doi:10.1088/1748-0221/3/02/P02012
Abstract
We report promising initial results obtained with new resistive-electrode GEM (RETGEM) detectors manufactured, for the first time, using screen printing technology. These new detectors allow one to reach gas gains nearly as high as with ordinary GEM-like detectors with metallic electrodes; however, due to the high resistivity of its electrodes the RETGEM, in contrast to ordinary hole-type detectors, has the advantage of being fully spark protected. We discovered that RETGEMs can operate stably and at high gains in noble gases and in other badly quenched gases, such as mixtures of noble gases with air and in pure air; therefore, a wide range of practical applications, including dosimetry and detection of dangerous gases, is foreseeable. To promote a better understanding of RETGEM technology some comparative studies were completed with metallic-electrode thick GEMs. A primary benefit of these new RETGEMs is that the screen printing technology is easily accessible to many research laboratories. This accessibility encourages the possibility to manufacture these GEM-like detectors with the electrode resistivity easily optimized for particular experimental or practical applications.
References in corpus (4)
- Advances in Thick GEM-like gaseous electron multipliers. Part I: atmospheric pressure operation
- Detection of the primary scintillation light from dense Ar, Kr and Xe with novel photosensitive gaseous detectors
- Development of innovative micropattern gaseous detectors with resistive electrodes and first results of their applications
- A Novel UV Photon Detector with Resistive Electrodes
Cited by in corpus (8)
- A concise review on THGEM detectors
- Advances in Gaseous Photomultipliers
- Thick GEM versus thin GEM in two-phase argon avalanche detectors
- Advances in the Development of Micropattern Gaseous Detectors with Resistive Electrodes
- Study of GEM-like detectors with resistive electrodes for RICH applications
- The Thick Gas Electron Multiplier and its derivatives: physics, technologies and applications
- GEMs with Double Layred Micropattern Electrodes and their Applications
- Progress in Developing Hybrid RPCs: GEM-like Detectors with Resistive Electrodes