1.3k citations · 1.7k across the 22 of their papers we have counts for
20 papers · 1 filter
An automated QC Station for the Calibration of the Mu2e Calorimeter Readout Units
E. Sanzani, C. Bloise, S. Ceravolo +25
The Mu2e calorimeter will employ Readout Units, each made of two Silicon Photomultipliers arrays and two Front End Electronics boards. To calibrate them, we have designed, assemble…
Paschen curve for a PCB trace in low vacuum
N. Atanov, S. Bini, S. Ceravolo +2
For one PCB trace region, where bare high voltage trace goes near GND pad, we estimated an electrical breakdown voltage in low vacuum using simplified geometrical model under some…
Mu2e calorimeter readout system
N. Atanov, V. Baranov, L. Baldini +43
The Mu2e electromagnetic calorimeter is made of two disks of un-doped parallelepiped CsI crystals readout by SiPM. There are 674 crystals in one disk and each crystal is readout by…
The laser-based gain monitoring system of the calorimeters in the Muon experiment at Fermilab
A. Anastasi, A. Basti, F. Bedeschi +41
The Muon experiment, E989, is currently taking data at Fermilab with the aim of reducing the experimental error on the muon anomaly by a factor of four and possibly clarifyin…
The Mu2e calorimeter: quality assurance of production crystals and SiPMs
N. Atanov, V. Baranov, J. Budagov +34
The Mu2e calorimeter is composed of two disks each containing 1348 pure CsI crystals, each crystal read out by two arrays of 6x6 mm2 monolithic SiPMs. The experimental requirements…
Quality Assurance on Un-Doped CsI Crystals for the Mu2e Experiment
N. Atanov, V. Baranov, J. Budagov +34
The Mu2e experiment is constructing a calorimeter consisting of 1,348 undoped CsI crystals in two disks. Each crystal has a dimension of 34 x 34 x 200 mm, and is readout by a large…