12 citations · 37 across the 12 of their papers we have counts for
12 papers
An FPGA-based readout chip emulator for the CMS ETL detector upgrade
L. Zhang, C. Edwards, D. Gong +9
We present an FPGA-based readout chip emulator board for the CMS Endcap Timing Layer (ETL) detector upgrade. The emulator board uses an Intel Cyclone 10 GX FPGA to emulate the digi…
A 40 Gbps Optical Transceiver for Particle Physics Experiments
B. Deng, X. Huang, H. Sun +12
We present the design and the test results of a quad-channel optical transceiver module (QTRx) possibly for future particle physics experiments. The transmitters of QTRx, each at 1…
A prototype optical link board with redundancy design for the ATLAS liquid argon calorimeter Phase-2 upgrade
X. Huang, C. Liu, A. Deiana +9
A prototype optical-link board has been developed for the ATLAS Liquid Argon Calorimeter Phase-2 upgrade. The board consists of 24 lpGBT chips and 8 VTRx+ modules and demonstrates…
QTIA, a 2.5 or 10 Gbps 4-Channel Array Optical Receiver ASIC in a 65 nm CMOS Technology
H. Sun, X. Huang, C. -P. Chao +14
The Quad transimpedance and limiting amplifier (QTIA) is a 4-channel array optical receiver ASIC, developed using a 65 nm CMOS process. It is configurable between the bit rate of 2…
In-pixel automatic threshold calibration for the CMS Endcap Timing Layer readout chip
H. Sun, D. Gong, C. Edwards +10
We present the implementation and verification of an in-pixel automatic threshold calibration circuit for the CMS Endcap Timing Layer (ETL) in the High-Luminosity LHC upgrade. The…
Quality control tests of the front-end optical link components for the ATLAS Liquid Argon Calorimeter Phase-1 upgrade
B. Deng, J. Thomas, L. Zhang +28
We present the procedures and results of the quality control tests for the front-end optical link components in the ATLAS Liquid Argon Calorimeter Phase-1 upgrade. The components i…
Characterization and quality control test of a gigabit cable receiver ASIC (GBCR2) for the ATLAS Inner Tracker Detector upgrade
W. Zhang, C. Chen, D. Gong +10
We present the characterization and quality control test of a gigabit cable receiver ASIC prototype, GBCR2, for the ATLAS Inner Tracker pixel detector upgrade. GBCR2 equalizes and…
Characterization of the CMS Endcap Timing Layer readout chip prototype with charge injection
H. Sun, D. Gong, W. Zhang +10
We present the characterization of a readout Application-Specific Integrated Circuit (ASIC) for the CMS Endcap Timing Layer (ETL) of the High-Luminosity LHC upgrade with charge inj…
A novel quad-channel 10 Gbps CMOS VCSEL array driver with integrated charge pumps
X. Huang, D. Gong, D. Guo +14
We present a novel design and the test results of a 4-channel driver for an array of Vertical-Cavity Surface-Emitting Lasers (VCSELs). This ASIC, named cpVLAD and fabricated in a 6…
Optical transceivers for event triggers in the ATLAS phase-I upgrade
L. Zhang, C. Chen, I. Cohen +16
The ATLAS phase-I upgrade aims to enhance event trigger performance in the Liquid Argon (LAr) calorimeter and the forward muon spectrometer. The trigger signals are transmitted by…
A 4-Channel 10-Gbps/ch CMOS VCSEL Array Driver with on-chip Charge-pumps
X. Huang, D. Gong, Q. Sun +15
We present the design and test results of a 4-channel 10-Gbps/ch Vertical-Cavity Surface-Emitting Laser array driver, the cpVLAD. With on-chip charge-pumps to extend the biasing he…
Design and hardware evaluation of the optical-link system for the ATLAS Liquid Argon Calorimeter Phase-II Upgrade
B. Deng, C. Liu, D. Gong +7
An optical link system is being developed for the ATLAS Liquid Argon Calorimeter Phase-II upgrade. The optical link system is responsible for transmit the data of over 182 thousand…